Experimental Study of the Possible Working Pressure Dynamic Control in the Aircraft Hydraulic System
Authors: Erofeev E.V. | Published: 21.09.2024 |
Published in issue: #3(150)/2024 | |
DOI: | |
Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
Keywords: hydraulic system, pressure reduction unit, pressure control, bench testing, solenoid valve, electrohydraulic servovalve actuator |
Computational and Experimental Study of the Autorotating Rotor Traction Characteristics
Authors: Menzulskiy S.Yu. | Published: 25.09.2024 |
Published in issue: #3(150)/2024 | |
DOI: | |
Category: Mechanical Engineering and Machine Science | Chapter: Ground Transport and Technological Means and Complexes | |
Keywords: all-terrain vehicle, rotor, autorotation, experiment, validation |
Road Roller Performance in the Highway Earth Embankment Compacting
Authors: Savelyev S.V., Poteryaev I.K., Razdobarin B.A. | Published: 25.09.2024 |
Published in issue: #3(150)/2024 | |
DOI: | |
Category: Mechanical Engineering and Machine Science | Chapter: Ground Transport and Technological Means and Complexes | |
Keywords: roller, compaction, performance, soil, vibration |
Experimental Research Methods in Reproducing Accelerated Gear Degradation of the Aircraft Control Surface Electromechanical Actuator
Authors: Skryabin A.V., Steblinkin A.I. | Published: 25.09.2024 |
Published in issue: #3(150)/2024 | |
DOI: | |
Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
Keywords: electromechanical actuator, gearbox, diagnostics, backlash, friction, degradation, aircraft |
Finishing the Tract Surfaces of the Turboprop Engine Blading with a Free Abrasive and using the Cavitation Effect
Authors: Asaev A.S., Drozdov P.A., Sitnikov I.V., Ivanayskiy A.V., Averin N.V. | Published: 22.01.2025 |
Published in issue: #4(151)/2024 | |
DOI: | |
Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
Keywords: finishing, cavitation, rotary blading, turboprop engine, free abrasive |
Optimizing Geometric Parameters of a Pipeline Elbow in the Pneumatic Polyethylene Transportation Systems
Authors: Ochkov A.A., Skornyakov V.M. | Published: 22.01.2025 |
Published in issue: #4(151)/2024 | |
DOI: | |
Category: Mechanical Engineering and Machine Science | Chapter: Hydraulic Machines, Vacuum, Compressor Technology, Hydraulic and Pneumatic Systems | |
Keywords: pneumatic transportation, polyethylene, two-phase flow, mathematical simulation, pipeline elbow |
Method of Reproducing the Vibroimpact Effect in the Laboratory Conditions
Authors: Proskurin A.V., Shlishevskiy A.V. | Published: 22.01.2025 |
Published in issue: #4(151)/2024 | |
DOI: | |
Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
Keywords: vibroimpact effect, acceleration shock spectrum, natural oscillation frequency, oscillation shape, pendulum installation, vibration transducer, resonator, oscillation generator |
Mathematical Simulation in Determining Energy-Efficient Modes of the Articulated Electric Bus Pneumatic System Operation
Authors: Rubanov P.S., Goncharov R.B., Skotnikov G.I. | Published: 22.01.2025 |
Published in issue: #4(151)/2024 | |
DOI: | |
Category: Mechanical Engineering and Machine Science | Chapter: Ground Transport and Technological Means and Complexes | |
Keywords: electric bus, pneumatic system, energy efficiency, pneumatic compressor, mathematical model |
Parametric Model of the Limiting Static State of a Multisection Scissor Lift
Authors: Nikitin S.V., Bortyakov D.E., Grachev А.А., Ashcheulov A.V. | Published: 09.04.2025 |
Published in issue: #1(152)/2025 | |
DOI: | |
Category: Mechanical Engineering and Machine Science | Chapter: Ground Transport and Technological Means and Complexes | |
Keywords: mechanism, scissor lift, parametric model, static analysis, static friction forces |
Effect of the Collar Displacement on the Fixed Pads Thrust Bearing Characteristics
Authors: Sokolov N.V. | Published: 09.04.2025 |
Published in issue: #1(152)/2025 | |
DOI: | |
Category: Mechanical Engineering and Machine Science | Chapter: Hydraulic Machines, Vacuum, Compressor Technology, Hydraulic and Pneumatic Systems | |
Keywords: thrust bearing, direct problem, axial clearance, sinusoid, cyclic frequency, bearing capacity, damping, hydrodynamic pressure, vacuum |