Effectiveness of Methods for Leading Strain Hardening of the Material of Cut Down Layer in Machining
| Authors: Yaroslavtsev V.M. | Published: 09.02.2015 |
| Published in issue: #1(100)/2015 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: cutting, leading plastic deforming, methods for surface hardening, general regularities, efficiency, application scope, method choice | |
Development of Diagnostic Complex for Domestic Automobile Diesel Engine Electronic Control System
| Authors: Tikhomirov M.V., Ovchinnikov S.V., Khryaschev Yu.E. | Published: 09.02.2015 |
| Published in issue: #1(100)/2015 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Inspection and Diagnostics in Mechanical Engineering | |
| Keywords: diesel engine, system, control, diagnostics, complex, algorithm | |
Geometry Analysis of Harmonic Gear with Cycloidal Cogs and Interaction Forces
| Authors: Klenikov S.S. | Published: 15.04.2015 |
| Published in issue: #2(101)/2015 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: cycloid, involute, harmonic cog gear, flexible gear, rigid gear, harmonic mechanism | |
Study of Comparative Resistance to Cavitational Erosion of Material Samples and Coatings in the Hydraulic Machine Flow Sections
| Authors: Petrov A.I., Skobelev M.M., Khanychev A.G. | Published: 15.04.2015 |
| Published in issue: #2(101)/2015 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Friction and Wear in Machines | |
| Keywords: сavitational erosion, ultrasonic cavitation, test samples, rubber | |
Revisiting the Possibility of HighSpeed Polymer Composite Processing
| Authors: Yaroslavtsev V.M. | Published: 19.06.2015 |
| Published in issue: #3(102)/2015 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: machining, polymer composites, high-speed cutting, thermal breakdown, laboratory setup, physical mechanism, high-performance processing | |
Mathematical Model of the Efficiency in Hybrid Laser Processing
| Authors: Htet Aung Lin, Taksants M.V., Misurov A.I. | Published: 19.06.2015 |
| Published in issue: #3(102)/2015 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Welding, Allied Processes Technologies | |
| Keywords: laser, efficiency, hybrid processing, hardening steel, mathematical model | |
Radiographic Films Testing Technique
| Authors: Kosarina E.I., Stepanov A.V., Demidov A.A., Krupnina O.A. | Published: 19.06.2015 |
| Published in issue: #3(102)/2015 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Inspection and Diagnostics in Mechanical Engineering | |
| Keywords: radiographic film, sensitometric characteristics, sensitivity to radiation, average gradient, resolution limit, characteristic curve | |
On the Methodology of Forecasting Input Flow Elements for Industrial Enterprise
| Authors: Smirnov S.V., Khramtsova А.В. | Published: 05.07.2015 |
| Published in issue: #3(28)/1997 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Product Quality Management. Standardization. Organization of Production | |
| Keywords: | |
On the choice of parameters of pulsed plasma process facility
| Authors: Grishin Yu.M., Rydkin M.V., Yarikov S.A. | Published: 02.09.2015 |
| Published in issue: #4(103)/2015 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: pulsed plasma process facility, modification of surface layer properties, pulse plasma accelerator, calculation methods, electrodynamic model, parameters of capacity storage | |
Research into process fluids using laser phase analysis
| Authors: Shiganov I.N., Melnikov D.M. | Published: 02.09.2015 |
| Published in issue: #4(103)/2015 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Inspection and Diagnostics in Mechanical Engineering | |
| Keywords: laser, analysis, process fluid, parameters, automated system | |