Key Research Insights into Dependence Between Turbine Flow Transducer Conversion Coefficients and Reynolds Number
| Authors: Aralov O.V., Buyanov I.V. | Published: 25.06.2021 |
| Published in issue: #2(137)/2021 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machines, Units and Technological Processes | |
| Keywords: turbine flow transducer, viscosity, pressure, density, temperature, Reynolds number, flow conversion coefficient | |
Development of a Structural Model of a Digital Twin of Machine-Building Enterprises Production and Logistics System
| Authors: Grigoriev S.N., Dolgov V.A., Nikishechkin P.A., Dolgov N.V. | Published: 26.06.2021 |
| Published in issue: #2(137)/2021 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Product Quality Management. Standardization. Organization of Production | |
| Keywords: digital twin, production and logistics system, mechanical engineering enterprise, information model, industry 4.0 | |
Results of Studying Strain Relaxation in Steel 25Kh17N2B-Sh (25Х17Н2Б-Ш) and Copper М1 Using Annular Samples of Equal Bending Resistance
| Authors: Proskurin A.V., Sayun S.P. | Published: 26.06.2021 |
| Published in issue: #2(137)/2021 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Manufacturing Engineering | |
| Keywords: stress relaxation, bar of equal bending resistance, stress, holding, nonlinear regression, relaxation properties | |
Methodology for Assessing the Efficiency of Digitalization of Production Processes of a Petrochemical Enterprise
| Authors: Shinkevich A.I., Nadezhdina M.E. | Published: 26.06.2021 |
| Published in issue: #2(137)/2021 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Product Quality Management. Standardization. Organization of Production | |
| Keywords: eficiency, production costs, digital modernization, integral indicator, digital production, organization of production | |
Numerical Study of the Flow in the Flow Path of a Centrifugal Natural Gas Compressor at Different Positions of the Inlet Guide Vane
| Authors: Krutikov M.V., Blinov V.L. | Published: 26.06.2021 |
| Published in issue: #2(137)/2021 | |
| DOI: | |
| Category: Power Engineering | Chapter: Turbomachines and Combination Turbine Plants | |
| Keywords: numerical simulation, centrifugal compressor, input guide vane, regulation, verification | |
Analysis of Viscous Fluid Flow in Micropump Elements for Circulatory Support Systems
| Authors: Khaustov A.I., Boyarskiy G.G. | Published: 08.09.2021 |
| Published in issue: #3(138)/2021 | |
| DOI: | |
| Category: Power Engineering | Chapter: Hydraulic Machines and Hydropneumatic units | |
| Keywords: micropump, 3D flow simulation, hemolysis, thrombosis, circulatory support system | |
Analysis of Nonlinear Cyclically Symmetric Isolation Sistem of a Cargo in a Container under Plane Harmonic Vibrations
| Authors: Belkin A.E., Dashtiev I.Z., Nikitin E.A. | Published: 20.12.2021 |
| Published in issue: #4(139)/2021 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: vibration isolation, isolation ring, polyure-thane shock absorbers, mathematical model, nonlinear vibration theory, harmonic linearization | |
Development of Methods to Increase the Efficiency of Management of Research and Research Activities of a Research and Production Enterprise
| Authors: Boldyrev V.S. | Published: 20.12.2021 |
| Published in issue: #4(139)/2021 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Product Quality Management. Standardization. Organization of Production | |
| Keywords: management, efficiency, research activities, organizational structures, intelligent systems, organization of production | |
Investigation of Cutting Forces for Thin Layers when Planing and Milling
| Authors: Shevchenko A.Yu., Popov A.Yu., Drozdov I.N., Blokhin D.A., Kisel A.G., Nekrylov E.V. | Published: 20.12.2021 |
| Published in issue: #4(139)/2021 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: cutting forces, universal dynamometer, planing, milling, small chip sections, lubricating coolant | |
Development of Methodological Principles Improving Quality of Research Organization in Scientific and Production Enterprises
| Authors: Boldyrev V.S. | Published: 01.04.2022 |
| Published in issue: #1(140)/2022 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Product Quality Management. Standardization. Organization of Production | |
| Keywords: management, scientific research, simulation, life cycle, intelligent document workflow, production organization | |