|
Mainournal ArchiveYear 2025 / № 1

Issue: #1 (152)

DOI 10.18698/0236-3941-2025-1

Aviation and Rocket-Space Engineering

Composite Material Properties Degradation under the Multi-Cycle Loading
Authors: Akulin P.V., Nasonov F.A.  

Category: Aviation and Rocket-Space Engineering | Chapter: Aircraft Strength and Thermal Modes

  
Keywords: composite materials, resource strength, rigidity and strength properties degradation, damage accumulation in the matrix, layered composite materials
Perspective Schemes for Air Preparation and Drying in the Air Temperature Control Systems of the Medium-Class Rocket Launch Complexes
Authors: Krylov P.V., Abrosimov N.A., Cherkasov I.A., Kozlov V.V., Ksenofontova E.A.  

Category: Aviation and Rocket-Space Engineering | Chapter: Aircrafts Development, Design and Manufacture

  
Keywords: launch complex, air temperature control system, refrigerator, membrane gas separation, membrane drying, adsorption, rotary adsorber
Methodology for Assessing Abrasive Particles Separation in the Axial Compressors Influencing Characteristics of the Aerial Vehicle Gas Turbine Engines: Dynamics Simulation in an Axial
Authors: Popov S.S., Cherkasov A.N., Klepikov D.S.  

Category: Aviation and Rocket-Space Engineering | Chapter: Thermal, Electric Jet Engines, and Power Plants of Aircrafts

  
Keywords: erosion, wear, compressor, gas turbine engine, separator, CAD, ANSYS, CFD, CFX
Influence of Injecting the Gasification Products of the Thermal Protection Coating of the SRE Nozzle Recessed Part on the Specific Impulse Losses
Authors: Shaydullin R.A., Sabirzyanov A.N.  

Category: Aviation and Rocket-Space Engineering | Chapter: Thermal, Electric Jet Engines, and Power Plants of Aircrafts

  
Keywords: combustion, ammonium perchlorate, polybutadiene rubber, simulation, decomposition, thermal protection coating, decomposition products injection, losses, chemical nonequi-librium, non-stationary ideal mixing reactor, flow reactor

Mechanical Engineering and Machine Science

Parametric Model of the Limiting Static State of a Multisection Scissor Lift
Authors: Nikitin S.V., Bortyakov D.E., Grachev А.А., Ashcheulov A.V.  

Category: Mechanical Engineering and Machine Science | Chapter: Ground Transport and Technological Means and Complexes

  
Keywords: mechanism, scissor lift, parametric model, static analysis, static friction forces
Effect of the Collar Displacement on the Fixed Pads Thrust Bearing Characteristics
Authors: Sokolov N.V.  

Category: Mechanical Engineering and Machine Science | Chapter: Hydraulic Machines, Vacuum, Compressor Technology, Hydraulic and Pneumatic Systems

  
Keywords: thrust bearing, direct problem, axial clearance, sinusoid, cyclic frequency, bearing capacity, damping, hydrodynamic pressure, vacuum
Comparative Analysis of Plastic Deformations in the Asphalt Concrete Mixture Compuction
Authors: Shishkin E.A.  

Category: Mechanical Engineering and Machine Science | Chapter: Ground Transport and Technological Means and Complexes

  
Keywords: asphalt concrete mixture, plastic deformations, rheological model, innovative compaction technology, efficiency

Power Engineering

Automatic Сontrol and Regulation Systems of the Thermal Power Plants and Approaches to their Improvement
Authors: Markov V.An.  

Category: Power Engineering | Chapter: Turbomachines and Combination Turbine Plants

  
Keywords: thermal power plant, internal combustion engine, diesel engine, gasoline engine, automatic control system, automatic regulation system, alternative fuel