MainCatalogMechanical Engineering and Machine ScienceTechnology and Equipment of Mechanical and Physical Processing
To Calculate the Expansion Mode in Viscoplastic Deformation
| Authors: Chernyaev A.V., Platonov V.I. | Published: 13.04.2026 |
| Published in issue: #1(156)/2026 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: viscoplasticity, kinematics, speed, power, stress, damageability of a material | |
Modeling of Thermal Processes During Electrical Discharge Machining in Order to Determine Rational Processing Conditions
| Authors: Stavitskiy I.B. | Published: 13.04.2026 |
| Published in issue: #1(156)/2026 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: electrical discharge machining, EDM pulse parameters, heat flux density, duration of electrical impulses, modeling of the EDM process, Stefan’s problem | |
Drawing with a Thick-Walled Product Thinning Exposed to Viscoplasticity
| Authors: Platonov V.I., Chernyaev A.V. | Published: 11.01.2026 |
| Published in issue: #4(155)/2025 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: viscoplasticity, velocity field, power, velocity, specific force | |
Finishing the Tract Surfaces of the Turboprop Engine Blading with a Free Abrasive and using the Cavitation Effect
| Authors: Asaev A.S., Drozdov P.A., Sitnikov I.V., Ivanayskiy A.V., Averin N.V. | Published: 22.01.2025 |
| Published in issue: #4(151)/2024 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: finishing, cavitation, rotary blading, turboprop engine, free abrasive | |
On the Need to Improve Document Management in Technological Preparation of the Metalworking Production
| Authors: Savitskiy V.V. | Published: 18.04.2024 |
| Published in issue: #1(148)/2024 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: production technological preparation, technology design, USTD, machining programming automation, CAM system, CNC equipment, problems in engineering personnel training | |
Optimizing Rational Modes in the Electrodischarge Machining of Parts Made of VT5 Titanium Alloy Based on Solving the Problem of Phase Material Conversion Boundary Displacement
| Authors: Stavitskiy I.B., Naumov A.P. | Published: 26.09.2023 |
| Published in issue: #3(146)/2023 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: electrodischarge machining, pulse parameters, machinability, VT5 alloy, heat flux density, electrical pulse duration, simulation, Stefan problem | |
Drawing with Thinning under Viscoplasticity Deformation of the Anisotropic Material
| Authors: Chudin V.N., Platonov V.I. | Published: 24.06.2023 |
| Published in issue: #2(145)/2023 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: viscoplasticity, stresses, deformations, speed, material discontinuity | |
Features of Applying the Force Displacement Theory to the Contact Stiffness Calculation for the Spindle Angular Contact Ball Bearing Support
| Authors: Frolov A.V. | Published: 13.09.2022 |
| Published in issue: #3(142)/2022 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: ball bearing, support, contact stiffness, friction, force displacement theory | |
Chemical Nickel Plating Technology for Product Surfaces
| Authors: Skryabin V.A., Zverovshchikov A.E. | Published: 03.04.2022 |
| Published in issue: #1(140)/2022 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: nickel-phosphorus coating, processing, planning, experiment, wear resistance | |
Investigation of Cutting Forces for Thin Layers when Planing and Milling
| Authors: Shevchenko A.Yu., Popov A.Yu., Drozdov I.N., Blokhin D.A., Kisel A.G., Nekrylov E.V. | Published: 20.12.2021 |
| Published in issue: #4(139)/2021 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: cutting forces, universal dynamometer, planing, milling, small chip sections, lubricating coolant | |