Search for optimal grain size of nitride-boron wheels during flat grinding of parts made of 06Х14Н6Д2МВТ-Ш steel on surface microrelief under conditions of fuzzy logic simulation
| Authors: Soler Ya.I., Nguyen M.T. | Published: 21.12.2015 |
| Published in issue: #6(105)/2015 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: grinding, roughness, statistics, median, quartile width, fuzzy logic, desirability function, Mamdani algorithm | |
Electrodeposition and physical mechanical properties of copper-nickel alloys from sulfosalicylate-ammoniac electrolyte
| Authors: Sevostyanov N.V. | Published: 21.12.2015 |
| Published in issue: #6(105)/2015 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: alloy, copper-nickel, electrodeposition, alloy composition, roughness, hardness, transient electrical resistivity, corrosion resistance | |
Current state and prospects of capillary fuel-intake unitsmade of combined porous metals-mesh for long lifetime spacecraft
| Authors: Aleksandrov A.A., Khartov V.V., Novikov Yu.M., Krylov V.I., Yagodnikov D.A. | Published: 21.12.2015 |
| Published in issue: #6(105)/2015 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Product Quality Management. Standardization. Organization of Production | |
| Keywords: porous permeable materials, innertank capillary type devices, spacecraft, combined porous metal-mesh, technological laser welding station, filters, technology welding machine | |
Increasing rowing wheel efficiency of watercraft at high-speed
| Authors: Yakimov N.M., Popov S.D., Chuvashev S.N. | Published: 14.02.2016 |
| Published in issue: #1(106)/2016 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: rowing wheel, high speeds of watercraft, computational experiment, blade shape, efficiency | |
Electrohydropulse installation for loosening the adfreezed coal
| Authors: Kim K.K., Shpilev M.A. | Published: 14.02.2016 |
| Published in issue: #1(106)/2016 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machines, Units and Technological Processes | |
| Keywords: electrohydropulse effect, loosening the adfreezeed coal, shock waves in the liquid | |
Designing the intermittent motion mechanism on the basis of wave gear with the internal deformation waves generator
| Authors: Timofeev G.A., Barbashov N.N., Tsibrovskiy A.N. | Published: 29.03.2016 |
| Published in issue: #2(107)/2016 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: intermittent motion mechanism, wave gear, a disk wave generator, flexible and hard gear wheels, wave engagement, wave gear coupling | |
Research Results of Coal Impact Grinding Process in the Pneumatic Transport Mill
| Authors: Nechayev G.I., Lenich S.V., Turushin V.A. | Published: 12.06.2016 |
| Published in issue: #3(108)/2016 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machines, Units and Technological Processes | |
| Keywords: grinding, coal powder processing, anthracite, pneumatic transport, specific surface area, mill | |
Planning, Simulation and Experimental Research into Typical Robotic Manipulator Operation
| Authors: Leskov A.G., Illarionov V.V., Kalevatykh I.A., Moroshkin S.D., Bazhinova K.V., Seliverstova E.V. | Published: 11.08.2016 |
| Published in issue: #4(109)/2016 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Robots, Mechatronics, and Robotic Systems | |
| Keywords: manipulator, automatic mode, computer appliance, task pattern, bag opening, ROS, MoveIt | |
Method of Large Plastic Strain Research
| Authors: Yaroslavtsev V.M. , Yaroslavtseva N.A. | Published: 11.08.2016 |
| Published in issue: #4(109)/2016 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Forming Technologies and Equipment | |
| Keywords: coordinate dividing micro-grids, machining, chip formation, method of plastic deformation research, cutting with outstripping plastic deformation | |
Formation of Radiation Defect Images with Radiation Nondestructive Testing
| Authors: Kosarina E.I., Stepanov A.V., Demidov A.A., Mikhailova N.A., Krupnina O.A. | Published: 11.08.2016 |
| Published in issue: #4(109)/2016 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Inspection and Diagnostics in Mechanical Engineering | |
| Keywords: radiation testing system, frequency-contrast characteristic, minimum size of the defect | |