Problems of Parts Reliability in the Design of Mechanical System
| Authors: Manshin Yu.P., Manshina E.Yu. | Published: 17.10.2019 |
| Published in issue: #5(128)/2019 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machines, Units and Technological Processes | |
| Keywords: reliability, probability, failure-free performance, operating time, machine, technical system, element | |
Structural Analysis of Linkage Mechanisms of Hydraulic Manipulators
| Authors: Piskunov M.A. | Published: 17.10.2019 |
| Published in issue: #5(128)/2019 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: hydraulic manipulator, structural analysis, Assur group, roundwood | |
Modernization of the System for Measuring Cutting Forces on the Basis of UDM Dynamometer Series
| Authors: Samoylov V.B. | Published: 17.10.2019 |
| Published in issue: #5(128)/2019 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: modernization, dynamometer, cutting force, virtual instrument | |
Profiling the Discharge Channel Flow Part of Axial Piston Pump
| Authors: Belov N.A., Nikitin O.F. | Published: 20.12.2019 |
| Published in issue: #6(129)/2019 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machines, Units and Technological Processes | |
| Keywords: axial piston pump, discharge channel, amount of movement, optimization, vibroacoustic characteristics | |
Assessment of the Liquid Deicing Reagent Distribution Zone Deformation at Different Parameters of the Environment
| Authors: Mandrovskiy K.P., Sadovnikova Ya.S. | Published: 21.12.2019 |
| Published in issue: #6(129)/2019 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machines, Units and Technological Processes | |
| Keywords: deicing reagent, deicing chemical drop, wind speed, disc height above the pavement, distribution zone, untreated zone, width of the area overlapping | |
Development and Research of Intermittent Motion Planetary Mechanisms with Elliptical Gearwheels
| Authors: Prikhodko A.A., Smelyagin A.I. | Published: 21.12.2019 |
| Published in issue: #6(129)/2019 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: rotational motion, intermittent motion, elliptical gearwheels, planetary mechanism, kinematic analysis, analogue of angular velocity | |
Calculated-Experimental Determination of Values Natural Frequencies Oscillations of the Case and Parameters of the Case Determining these Values
| Authors: Proskurin A.V., Shlishevskiy A.V. | Published: 21.12.2019 |
| Published in issue: #6(129)/2019 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machines, Units and Technological Processes | |
| Keywords: natural frequency of oscillations, form of natural oscillations, shock loading, spectral density, experimental studies, piezoelectric accelerometer | |
Lateral Motion of Towed Underwater Vehicle within the Problem of Continental Shelf Monitoring
| Authors: Grumondz V.T., Pilgunov R.V., Vinogradov M.V., Maykova N.V. | Published: 17.02.2020 |
| Published in issue: #1(130)/2020 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: towed underwater vehicle, continental shelf monitoring, lateral motion dynamics, horizontal circulation, motion stability | |
Radial Hydrostatic Compensator for Deformations in a Machine-Tool Technological System
| Authors: Kodnyanko V.A. | Published: 18.02.2020 |
| Published in issue: #1(130)/2020 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: hydrostatic deformation compensator, compliance, negative compliance, zero compliance, load properties | |
Planning and Process Management of Industrial Enterprises: Problems and Organizational and Technical Solutions
| Authors: Lyakhovich D.G. | Published: 18.02.2020 |
| Published in issue: #1(130)/2020 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Product Quality Management. Standardization. Organization of Production | |
| Keywords: industry, enterprise, production, planning, organization, organizational and technical solution | |