Design and Production Technology Features of the Domed Solid Fuel Gas Generators with Single-Stage Response of the Vehicle Passive Safety System
| Authors: Gonsales A.A.V., Karnaukhov K.A., Malishchuk T.S. , Popov Yu.V. | Published: 27.03.2023 |
| Published in issue: #1(144)/2023 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: gas generator, airbag, automotive industry, assembly process, production technology | |
Analytical Model of Quasi-Brittle Fracture of a Plate with Crack
| Authors: Kurguzov V.D., Astapov N.S. | Published: 27.03.2023 |
| Published in issue: #1(144)/2023 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: brittle and quasi-brittle fracture, fracture dual criterion, elastoplastic material, ultimate strain | |
Structural and Functional Analysis of the Automobile Frontal Two-Stage Airbag Modules
| Authors: Gonsales A.A.V., Malishchuk T.S. | Published: 24.06.2023 |
| Published in issue: #2(145)/2023 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: passive safety, airbag module, gas generator, high-speed imaging, instrumental decomposition, reverse engineering | |
Justification of the Application of the Lost-Wax Casting Method in Order-Based Multi-Nomenclature Production
| Authors: Dolgov V.A., Nikishechkin P.A., Dolgov N.V. | Published: 24.06.2023 |
| Published in issue: #2(145)/2023 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Product Quality Management. Standardization. Organization of Production | |
| Keywords: precision casting, additive technologies, wax models, production organization, multi-nomenclature production | |
Influence of Friction and Elastic Shape Recovery on the Development of Corrugations under Oblique Plate Compression in Die Tooling
| Authors: Tarasov V.A., Baskakov V.D., Boyarskiy D.S., Gerasimov N.V., Baburin M.A., Karnaukhov K.A. | Published: 24.06.2023 |
| Published in issue: #2(145)/2023 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Manufacturing Engineering | |
| Keywords: corrugation, thinning, thickening, reshaping, workpiece contour | |
Drawing with Thinning under Viscoplasticity Deformation of the Anisotropic Material
| Authors: Chudin V.N., Platonov V.I. | Published: 24.06.2023 |
| Published in issue: #2(145)/2023 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: viscoplasticity, stresses, deformations, speed, material discontinuity | |
Method for Determining Probability of Capturing the Asymmetric Parts with the Rotation Body Shape in the Disk Hopper Loading-Orientation Devices
| Authors: Vasin S.A., Pantyukhina E.V. | Published: 25.09.2023 |
| Published in issue: #3(146)/2023 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machines, Units and Technological Processes | |
| Keywords: hopper loading-orientation device, part orientation, part capture probability, automatic loading, part loading performance, parts with implicit asymmetry, automatic assembly | |
On the Possibility of Modernizing Moving Coils of the Electrodynamic Vibration Stand
| Authors: Zuev Al.A., Proskurin A.V. | Published: 25.09.2023 |
| Published in issue: #3(146)/2023 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machines, Units and Technological Processes | |
| Keywords: vibration testing, electrodynamic vibration stand, moving coil, conductor, modernization | |
Optimizing Rational Modes in the Electrodischarge Machining of Parts Made of VT5 Titanium Alloy Based on Solving the Problem of Phase Material Conversion Boundary Displacement
| Authors: Stavitskiy I.B., Naumov A.P. | Published: 26.09.2023 |
| Published in issue: #3(146)/2023 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: electrodischarge machining, pulse parameters, machinability, VT5 alloy, heat flux density, electrical pulse duration, simulation, Stefan problem | |
Design Methodology of the Bevel Gear with Helical Teeth
| Authors: Khalturin M.A. | Published: 10.01.2024 |
| Published in issue: #4(147)/2023 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: bevel gear, displacement coefficient, relative slip coefficient, specific pressure coefficient, overlap coefficient | |