16 / 16
[2] Tretyakov E.M. Teoreticheskie osnovy protsessov dressirovki listovoy stali i
kalibrovki [The Fundamental Theory of Sheet Steel Pinch Rolling and Calibration].
Diss. doct. tekhn. nauk [Dr. tehn. sci. diss.]. Moscow, IMASH AN SSSR, 1971.
402 p.
[3] Khill R. Russ. ed.: Matematicheskaya teoriya plastichnosti [The Mathematical Theory
of Plasticity]. Moscow, Gostekhizdat Publ., 1956. 408 p.
[4] Kachanov L.M. Osnovy teorii plastichnosti [The Fundamental Theory of Plasticity].
Moscow, Nauka Publ., 1969. 420 p.
[5] Tretyakov E.M. The Basic Laws of Dry Contact Friction with the Elastic and Plastic
Deformation of Solids.
Problemy mashinostroeniya i nadezhnosti mashin (PMNM
)
RAN
[J. of Machinery Manufacture and Reliability], 2006, no. 2, pp. 47–59 (in
Russ.).
[6] Tret’yakov E.M. Calibration of Flat Workpieces and Parts.
Kuznechno-
shtampovochnoe proizvodstvo
[Forging-stamping production], 1962, no. 4, pp. 6–9
(in Russ.).
[7] Tretyakov A.V., Tret’yakov E.M., Migacheva G.N. Dressirovka i kachestvo tonkogo
lista [Pinch Rolling and Quality of Thin Sheets]. Moscow, Metallurgiya Publ., 1977.
232 p.
[8] Tretyakov E.M. Residual Stresses in Cold-Worked Metal and in Pinch Rolled Thin
Sheet Metal.
Problemy mashinostroeniya i nadezhnosti mashin (PMNM)
,
RAN
[J. of
Machinery Manufacture and Reliability], 2008, no. 1, pp. 49–61 (in Russ.).
[9] Tretyakov E.M. The Problems of Thin Strip Plastic Compression with Different
Boundary Conditions Using the Correspondence Principle.
Proizvodstvo prokata
[Production Of Rolled Stock], 2011, no. 4, pp. 2–13 (in Russ.).
Статья поступила в редакцию 10.04.2014
Третьяков Евгений Михайлович — д-р техн. наук, старший научный сотрудник Ин-
ститута машиноведения им. А.А. Благонравова РАН. Автор более 80 научных работ
в области теории процессов пластического формоизменения и прочности машин.
Института машиноведения им. А.А. Благонравова РАН, Российская Федерация,
101990, Москва, пер. Малый Харитоньевский, д. 4.
Tretyakov E.M. — Dr. Sc. (Eng), senior researcher of Blagonravov Institute for Machine
Sciences, Russian Academy of Sciences (IMASH). Author of more than of 80 publications
in the fields of theory of plastic forming and strength of machines.
Blagonravov Institute of Machine Sciences, Russian Academy of Sciences, Maly
Kharitonievskiy Per. 4, Moscow, 101990 Russian Federation.
Просьба ссылаться на эту статью следующим образом:
Третьяков Е.М. Упругие и пластические деформации в тонких полосах при сжатии
их между плоскими жeсткими штампами // Вестник МГТУ им. Н.Э. Баумана. Сер.
Машиностроение. 2015. № 3. C. 103–118.
Please cite this article in English as:
Tretyakov E.M. Elastic and Plastic Thin Strip Deformations under their Compression
between Plane Rigid Stamps.
Vestn. Mosk. Gos. Tekh. Univ. im. N.E. Baumana
[Herald of
the Bauman Moscow State Tech. Univ., Mech. Eng.], 2015, no. 3, pp. 103–118.
118 ISSN 0236-3941. Вестник МГТУ им. Н.Э. Баумана. Сер. “Машиностроение”. 2015. № 3