Modeling of Thermal Processes During Electrical Discharge Machining in Order to Determine Rational Processing Conditions
| Authors: Stavitskiy I.B. | Published: 13.04.2026 |
| Published in issue: #1(156)/2026 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: electrical discharge machining, EDM pulse parameters, heat flux density, duration of electrical impulses, modeling of the EDM process, Stefan’s problem | |
To Calculate the Expansion Mode in Viscoplastic Deformation
| Authors: Chernyaev A.V., Platonov V.I. | Published: 13.04.2026 |
| Published in issue: #1(156)/2026 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: viscoplasticity, kinematics, speed, power, stress, damageability of a material | |
The Method of Force Control in the Contact Area of the Compacted Material and the Drum with a Directed Vibration Exciter
| Authors: Shishkin E.A., Ayupov R.M. | Published: 13.04.2026 |
| Published in issue: #1(156)/2026 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Ground Transport and Technological Means and Complexes | |
| Keywords: vibrating roller, roller, compaction, directed vibration, driving force, contact force, angle, simulation | |
Effective Methods of Sharpening Metalcutting Tools using Chromium Diiodide
| Authors: Butenko V.I., Chaava M.M., Pastukhov Ph.A., Kadach R.G., Soprantsova Yu.S. | Published: 08.07.2026 |
| Published in issue: #2(157)/2026 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: sharpening method, tool, chromium diiodide, grinding wheel, durability, roughness, iron iodides | |
Surface Preparation by Detonation Unit before Coating Spraying
| Authors: Vashin S.A., Ruban E.A. | Published: 12.07.2026 |
| Published in issue: #2(157)/2026 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: detonation coating spraying, sandblasting, surface roughness, abrasive material | |
Development Prospects of Pneumatic Conveying Systems for Bulk Solids
| Authors: Demikhov K.E., Ochkov A.A., Skornyakov V.M. | Published: 12.07.2026 |
| Published in issue: #2(157)/2026 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Hydraulic Machines, Vacuum, Compressor Technology, Hydraulic and Pneumatic Systems | |
| Keywords: pneumatic conveying, bulk solids, efficiency improvement, energy efficiency, development prospects, parameter optimization | |
Problems of Searching for Rational Parameters of Active Component Parameters in a Car’s Passive Safety System
| Authors: Goncharov R.B., Zuzov V.N., Kositsyn B.B., Padalkin B.V. | Published: 06.11.2026 |
| Published in issue: #3(158)/2026 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Ground Transport and Technological Means and Complexes | |
| Keywords: passive safety, passenger car, optimization, machine learning, airbag, seat belt | |
Prospects for Increasing Nominal Operating Pressure in Aircraft Hydraulic Systems using the Calculation Example of a Pipeline
| Authors: Erofeev E.V., Skryabin A.V., Veresnikov G.S. | Published: 08.11.2026 |
| Published in issue: #3(158)/2026 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: hydraulic system, electro-hydraulic servovalve actuator, pressure, energy efficiency, weight efficiency, volume-weight characteristics, pipeline strength, centralized pipeline | |
The Use of Oscillating Tool Movements to Improve the Quality of the Machined Surface
| Authors: Obraztsov A.E., Utenkov V.M., Kuznetsov P.M. | Published: 08.11.2026 |
| Published in issue: #3(158)/2026 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: ocillating tool motions, brittle materials, microdrive, quality, machined surface, ultrasonic machining, ultrasonic vibrating tool | |
Analysis of Combination Methods and Development of a Software Package for Synthesizing Spatial Six-Link Mechanisms for Mechatronic Devices
| Authors: Khabibullin F.F. | Published: 08.11.2026 |
| Published in issue: #3(158)/2026 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: spatial mechanism, crank, rotary motion transmission, mechanism synthesis, mechanism combination, CAD, software code | |