Key Research Insights into Dependence Between Turbine Flow Transducer Conversion Coefficients and Reynolds Number
Authors: Aralov O.V., Buyanov I.V. | Published: 25.06.2021 |
Published in issue: #2(137)/2021 | |
Category: Mechanical Engineering and Machine Science | Chapter: Machines, Units and Technological Processes | |
Keywords: turbine flow transducer, viscosity, pressure, density, temperature, Reynolds number, flow conversion coefficient |
The paper focuses on the key findings of the first experimental studies on assessing the dependence of the relative deviation of the conversion coefficients of the turbine flow transducer KTFT on the physicochemical properties of oil and oil products, as well as test conditions. The studies were carried out on a specialized calibration stand and on three systems for measuring the quantity and quality indicators of oil / oil products, operated in the main pipeline transport under various climatic conditions. Relying on the obtained experimental data, we assessed the influence of test conditions on KTFT and established correlation dependences between the kinematic viscosity, density, temperature and excess pressure. The study shows that the kinematic viscosity and density of the working medium, i.e., oil / oil products, as well as the Reynolds number Re, have the greatest influence on KTFT. Furthermore, with a change in the volumetric flow rate and kinematic viscosity at one object, it is possible to predict the change in KTFT in the entire range of the volumetric flow rate, relying on Re values. Findings of research show that the tested turbine flow transducer DN 250-1.6 can be operated when Re > 7600
References
[1] Proskuryakov R.M., Matviychuk N.V., Rodionova D.A. Conceptual problems of automatic measurement system on oil pipeline and the ways of its solution. Mezhdunarodnyy nauchno-issledovatel’skiy zhurnal [International Research Journal], 2016, no. 12-3, pp. 168--171 (in Russ.). DOI: https://doi.org/10.18454/IRJ.2016.54.026
[2] Aralov O.V., Buyanov I.V., Vorobʼev S.I., et al. Sovremennoe sostoyanie vedeniya uchetnykh operatsiy s neft’yu i nefteproduktami s primeneniem izmeritel’nykh sistem v Rossii [Current state of conducting registration operations with oil and oil products using measuring systems in Russia]. Moscow, Nedra Publ., 2019.
[3] Panchenkov G.M. Teoriya vyazkosti zhidkosti [Theory of liquid viscosity]. Moscow, Gostoptekhizdat Publ., 1947.
[4] Aralov O.V., Buyanov I.V., Savanin A.S., et al. Research of methods for oil kinematic viscosity calculation in the oil-trunk pipeline. Nauka i tekhnologii truboprovodnogo transporta nefti i nefteproduktov [Science and Technologies: Oil and Oil Products Pipeline Transportation], 2017, vol. 7, no. 5, pp. 97--105 (in Russ.).
[5] Tashbulatov R.R., Mastobaev B.N., Karimov R.M., et al. Analysis of changing viscosity-temperature dependence in binary mixture of oils. Transport i khranenie nefteproduktov i uglevodorodnogo syr’ya [Transport and Storage of Oil Products and Hydrocarbons], 2018, no. 2, pp. 5--9 (in Russ.). DOI: https://doi.org/10.24411/0131-4270-2018-10201
[6] Severa L., Havlicek M., Kumbar V. Temperature dependent kinematic viscosity of different types of engine oils. Acta Univ. Agric. Silvic. Mendelianae Brun., 2009, vol. 57, pp. 95--102. DOI: https://doi.org/10.11118/actaun200957040095
[7] Gheshlaghi B.K., Dehghani M.R., Parhizgar H. Prediction kinematic viscosity of petroleum fractions using artificial neural networks. IJOGST, 2014, vol. 3, no. 2, pp. 51--65.
[8] Venttsel’ E.S. Teoriya veroyatnosti [Probability theory]. Moscow, Nauka Publ., 1969.
[9] Eliseeva I.I., Yuzbashev M.M. Obshchaya teoriya statistiki [General theory of statistics]. Moscow, Finansy i statistika Publ., 2004.
[10] Landau L.D., Lifshits E.M. Gidrodinamika [Hydrodynamics]. Moscow, FIZMATLIT Publ., 2001.
[11] Loytsyanskiy L.G. Mekhanika zhidkosti i gaza [Fluid mechanics]. Moscow, Drofa Publ., 2003.
[12] Pavlovskiy V.A., Chistov L.A., Kuchinskiy D.M. Modeling of pipe flows. Vestnik SPbGU. Prikladnaya matematika. Informatika [Vestnik of St. Petersburg University. Applied Mathematics. Computer Science], 2019, vol. 15, no. 1, pp. 93--105 (in Russ.). DOI: https://doi.org/10.21638/11702/spbu10.2019.107
[13] Jimenez J. Turbulent flows over rough walls. Annu. Rev. Fluid Mech., 2004, no. 36, pp. 173--196. DOI: https://doi.org/10.1146/annurev.fluid.36.050802.122103
[14] Nesterov V.N., Andreev I.P. Increasing the accuracy of turbine flow transducers using the method of generalized influence variables. Meas. Tech., 2017, vol. 60, no. 4, pp. 336--342. DOI: https://doi.org/10.1007/s11018-017-1198-z
[15] Abdullin I.A., Laptev N.I., Zorin Yu.V., et al. Experimental study on measuring channel of information measuring system based on turbine oil flow converter. Vestnik Kazanskogo tekhnologicheskogo universiteta [Bulletin of the Technological University], 2010, no. 12, pp. 496--501 (in Russ.).