Metal Liner Reliability Assessment for BREST-OD-300 Reactor Vessel Accounting for Brittle Fracture and Leaks
Authors: Solonin V.I., Terekhin A.N., Shiverskiy E.A. | Published: 17.10.2019 |
Published in issue: #5(128)/2019 | |
DOI: | |
Category: Power Engineering | Chapter: Nuclear Power Plants, Fuel Cycle, Radiation Safety | |
Keywords: multi-layer metal-concrete vessel, metal liner, vessel reliability, probabilistic mechanical model-ing, brittle fracture and leak |
Simulation of Initiation and Development of Corrosion Cracks in Zirconium Fuel Claddings Under Conditions of Stress Corrosion Cracking in Environment of Iodine
Authors: Sotnikov A.S. | Published: 17.10.2019 |
Published in issue: #5(128)/2019 | |
DOI: | |
Category: Power Engineering | Chapter: Nuclear Power Plants, Fuel Cycle, Radiation Safety | |
Keywords: E110 zirconium alloy, fuel cladding, stress corrosion cracking, simulation, reactor, operation |
Simulation of Gas Flow in Channels with Variable Cross-Section at Different Flow Modes using Lattice Boltzmann Method (LBM)
Authors: Burmistrov A.V., Salikeev S.I., Raykov A.A. | Published: 23.12.2019 |
Published in issue: #6(129)/2019 | |
DOI: | |
Category: Power Engineering | Chapter: Vacuum, Compressor Technology, and Pneumatic Systems | |
Keywords: channels of variable cross-section, gas flow, conductivity, mass flow rate, viscous mode, molecular mode, transient mode, fluid dynamics equations |
Automatic Control Systems of Thermal Power Plants. State of the Art and Development Prospects
Authors: Markov V.An., Shatrov V.I. | Published: 23.12.2019 |
Published in issue: #6(129)/2019 | |
DOI: | |
Category: Power Engineering | Chapter: Heat Engines | |
Keywords: thermal power plant, piston internal combustion engine, diesel engine, automatic control system |
Comparative Analysis of the Effect of Technological Defects on the Strength of Е110 Alloy Fuel Cladding under Stress Corrosion Cracking
Authors: Sotnikov A.S. | Published: 23.12.2019 |
Published in issue: #6(129)/2019 | |
DOI: | |
Category: Power Engineering | Chapter: Nuclear Power Plants, Fuel Cycle, Radiation Safety | |
Keywords: E110 zirconium alloy, fuel cladding, corrosion, stress, internal surface, technological defect, stress corrosion cracking |
Unsteady Motion of Viscous Electrically Conductive Fluid Rotating in Half-Space Bounded by a Wall in the Presence of Medium Injection (Suction)
Authors: Gurchenkov A.A. | Published: 20.02.2020 |
Published in issue: #1(130)/2020 | |
DOI: | |
Category: Power Engineering | Chapter: Nuclear Power Plants, Fuel Cycle, Radiation Safety | |
Keywords: magnetic hydrodynamic equations, electrically conductive fluid, normal oscillations, boundary layers |
Algorithm for Determining Optimum Runner Number in the Blading Section of a Turbomolecular Pump
Authors: Demikhov K.E., Gordeeva U.S., Ochkov A.A. | Published: 20.02.2020 |
Published in issue: #1(130)/2020 | |
DOI: | |
Category: Power Engineering | Chapter: Vacuum, Compressor Technology, and Pneumatic Systems | |
Keywords: turbomolecular high vacuum pump, blading section, runner, optimisation, pumping speed |
Hybrid Fusion-Fission System with Neutron Source Based on Deuterium Plasma
Authors: Chirkov A.Yu. | Published: 07.06.2020 |
Published in issue: #3(132)/2020 | |
DOI: | |
Category: Power Engineering | Chapter: Nuclear Power Plants, Fuel Cycle, Radiation Safety | |
Keywords: deuterium, fusion neutrons, hybrid reactor, magnetic confinement, plasma, energy balance |
Experimental Investigation of Two-Phase Heat Transfer in a Simulated Cooling Duct of a Piston Engine Cylinder Head
Authors: Abyzov O.V., Galyshev Yu.V., Ivanov A.K. | Published: 10.08.2020 |
Published in issue: #4(133)/2020 | |
DOI: | |
Category: Power Engineering | Chapter: Heat Engines | |
Keywords: cylinder head, nucleate boiling, motor-free test bench, heat transfer, boiling crisis |
Modified Algebraical Cebeci --- Smith Turbulent Viscosity Model for the Entire Surface of a Blunted Cone
Authors: Gorskiy V.V., Loktionova A.G. | Published: 11.08.2020 |
Published in issue: #4(133)/2020 | |
DOI: | |
Category: Aviation and Rocket-Space Engineering | Chapter: Aerodynamics and Heat Transfer Processes in Aircrafts | |
Keywords: heat transfer, turbulence, boundary layer, effective length method |