|
Mainournal ArchiveYear 2019 / № 6

Issue: #6 (129)

DOI 10.18698/0236-3941-2019-6

Aviation and Rocket-Space Engineering

Using the Maximum Pressure Principle for Verification of Calculation of Stationary Subsonic Flow
Authors: Anikin V.A., Vyshinsky V.V., Pashkov O.A., Streltsov E.V.  

Category: Aviation and Rocket-Space Engineering | Chapter: Aerodynamics and Heat Transfer Processes in Aircrafts

  
Keywords: nonlinear partial differential equations, boundary value problems, Euler equations, Reynolds averaged Navier --- Stokes equations, subsonic vortex flows, subsonic maximum pressure principle
Structure and Heat Resistance of Intermetallic Rhenium-Containing Alloy after Heat Treatment
Authors: Arginbaeva E.G., Bazyleva O.A., Karachevtsev F.N., Nazarkin R.М  

Category: Aviation and Rocket-Space Engineering | Chapter: Innovation Technologies of Aerospace Engineering

  
Keywords: intermetallics, nickel, heat treatment, structure, phase, misfit
Investigation of the Influence of Structural and Adjusting Parameters of a Quadruple-Orifices Electrohydraulic Amplifier on the Static Characteristics of Rocket Pack Steering Actuator
Authors: Belonogov O.B.  

Category: Aviation and Rocket-Space Engineering | Chapter: Aircrafts Development, Design and Manufacture

  
Keywords: structural and adjusting parameters, electrohydraulic amplifier, steering actuator, static characteristics
Study of Hydraulic Characteristics of the Cooling Path of a Model Liquid Rocket Engine Manufactured using Additive Technology of Selective Laser Melting
Authors: Yagodnikov D.A., Aleksandrenkov V.P., Kovalev K.E., Grigoryants A.G., Drenin A.A.  

Category: Aviation and Rocket-Space Engineering | Chapter: Thermal, Electric Jet Engines, and Power Plants of Aircrafts

  
Keywords: hydraulic characteristics, cooling path, combustion chamber fins, additive technologies, thermal protection

Mechanical Engineering and Machine Science

Profiling the Discharge Channel Flow Part of Axial Piston Pump
Authors: Belov N.A., Nikitin O.F.  

Category: Mechanical Engineering and Machine Science | Chapter: Machines, Units and Processes

  
Keywords: axial piston pump, discharge channel, amount of movement, optimization, vibroacoustic characteristics
Assessment of the Liquid Deicing Reagent Distribution Zone Deformation at Different Parameters of the Environment
Authors: Mandrovskiy K.P., Sadovnikova Ya.S.  

Category: Mechanical Engineering and Machine Science | Chapter: Machines, Units and Processes

  
Keywords: deicing reagent, deicing chemical drop, wind speed, disc height above the pavement, distribution zone, untreated zone, width of the area overlapping
Development and Research of Intermittent Motion Planetary Mechanisms with Elliptical Gearwheels
Authors: Prikhodko A.A., Smelyagin A.I.  

Category: Mechanical Engineering and Machine Science | Chapter: Machine Science, Drive Systems, and Machine Components

  
Keywords: rotational motion, intermittent motion, elliptical gearwheels, planetary mechanism, kinematic analysis, analogue of angular velocity
Calculated-Experimental Determination of Values Natural Frequencies Oscillations of the Case and Parameters of the Case Determining these Values
Authors: Proskurin A.V., Shlishevskiy A.V.  

Category: Mechanical Engineering and Machine Science | Chapter: Machines, Units and Processes

  
Keywords: natural frequency of oscillations, form of natural oscillations, shock loading, spectral density, experimental studies, piezoelectric accelerometer

Power, Metallurgic and Chemical Engineering

Simulation of Gas Flow in Channels with Variable Cross-Section at Different Flow Modes using Lattice Boltzmann Method (LBM)
Authors: Burmistrov A.V., Salikeev S.I., Raykov A.A.  

Category: Power, Metallurgic and Chemical Engineering | Chapter: Vacuum, Compressor Technology, and Pneumatic Systems

  
Keywords: channels of variable cross-section, gas flow, conductivity, mass flow rate, viscous mode, molecular mode, transient mode, fluid dynamics equations
Automatic Control Systems of Thermal Power Plants. State of the Art and Development Prospects
Authors: Markov V.A., Shatrov V.I.  

Category: Power, Metallurgic and Chemical Engineering | Chapter: Heat Engines

  
Keywords: thermal power plant, piston internal combustion engine, diesel engine, automatic control system
Comparative Analysis of the Effect of Technological Defects on the Strength of Е110 Alloy Fuel Cladding under Stress Corrosion Cracking
Authors: Sotnikov A.S.  

Category: Power, Metallurgic and Chemical Engineering | Chapter: Nuclear Reactor Engineering, Machines, Assemblies, and Nuclear Materials Technology

  
Keywords: E110 zirconium alloy, fuel cladding, corrosion, stress, internal surface, technological defect, stress corrosion cracking