Computational and Experimental Substantiation of Strength and Seismic Resistance of the Ionization Chamber Suspensions in the Control and Protection Systems of Fast Neutron Reactors
| Authors: Glazyuk Ya.V., Popov V.Yu., Fedorov M.Yu., Kapustin E.A. | Published: 28.10.2025 |
| Published in issue: #3(154)/2025 | |
| DOI: | |
| Category: Power Engineering | Chapter: Nuclear Power Plants, Fuel Cycle, Radiation Safety | |
| Keywords: еquipment, ionization chamber, vibrations, reactor, strength, seismic resistance | |
Pressure Drop in a Tube Bundle with the Countercharge Arrangement
| Authors: Stolotnyuk Ya.D. | Published: 28.10.2025 |
| Published in issue: #3(154)/2025 | |
| DOI: | |
| Category: Power Engineering | Chapter: Nuclear Power Plants, Fuel Cycle, Radiation Safety | |
| Keywords: сross-flown tube bundle, static pressure, pressure drop | |
Accounting for the Heater Inertiain the Single-Flow Non-Stationary Method to Study the Heat Transfer Surfaces
| Authors: Egorov K.S., Stepanova L.V. | Published: 12.01.2026 |
| Published in issue: #4(155)/2025 | |
| DOI: | |
| Category: Power Engineering | Chapter: Theoretical and Applied Heat Engineering | |
| Keywords: single-flow non-stationary method, maximum slope, heat transfer coefficient, heat transfer surface | |
Use of a Combination Power System to Improve the Performance of a Spark-Ignition Engine Running on Carbon-Free Fuel
| Authors: Dunin A.Yu., Nguyen V.D., Akhmetzhanova E.U., Petrov A.M., Konyushkov D.S. | Published: 13.04.2026 |
| Published in issue: #1(156)/2026 | |
| DOI: | |
| Category: Power Engineering | Chapter: Turbomachines and Combination Turbine Plants | |
| Keywords: spark-ignition internal combustion engine, carbon-free fuel, ammonia, combination power system | |
Assessment of Anisotropy on Strength Properties of the Propulsion System Combustion Chamber Heat-Protective Coating During Changes in Ambient Temperature
| Authors: Ushakova E.S., Tuponogov V.G. | Published: 13.04.2026 |
| Published in issue: #1(156)/2026 | |
| DOI: | |
| Category: Power Engineering | Chapter: Theoretical and Applied Heat Engineering | |
| Keywords: solid-fuel rocket engine, combustion chamber heat-protective coating, nitrile butadiene rubber, calender effect, extrusion, thermocycling | |