Development of Tools for Thermodynamic Calculation of Rocket Engine Characteristics using the Julia Programming Language
Authors: Belov G.V. | Published: 20.12.2021 |
Published in issue: #4(139)/2021 | |
DOI: | |
Category: Power Engineering | Chapter: Heat Engines | |
Keywords: combustion products, rocket fuel, thermodynamic modeling |
Automatic Control and Regulation Systems for Heat and Power Plants
Authors: Markov V.An. | Published: 20.12.2021 |
Published in issue: #4(139)/2021 | |
DOI: | |
Category: Power Engineering | Chapter: Heat Engines | |
Keywords: heat and power plant, internal combustion engine, diesel engine, gasoline engine, automatic control system, automatic regulation system |
Automatic Control and Regulation Systems for Heat and Power Plants
Authors: Markov V.An. | Published: 20.12.2021 |
Published in issue: #4(139)/2021 | |
DOI: | |
Category: Power Engineering | Chapter: Heat Engines | |
Keywords: heat and power plant, internal combustion engine, diesel engine, gasoline engine, automatic control system, automatic regulation system |
On the Development of Tolerant Fuel --- a New Generation Fuel
Authors: Sotnikov A.S. | Published: 21.12.2021 |
Published in issue: #4(139)/2021 | |
DOI: | |
Category: Power Engineering | Chapter: Nuclear Power Plants, Fuel Cycle, Radiation Safety | |
Keywords: reactor core safety, fuel element cladding operation, zirconium alloys, silicon carbide, fragility, composite, tolerant fuel |
Use of Turboprop Fans with the Device for Intensification of Aeration of Open Pits for Ventilation of Mined-Out Space
Authors: Starostin I.I., Bondarenko A.V. | Published: 21.12.2021 |
Published in issue: #4(139)/2021 | |
DOI: | |
Category: Power Engineering | Chapter: Turbomachines and Combination Turbine Plants | |
Keywords: turboprop engine, aircraft engine, quarry, ventilation, quarry fan, aeration, quarry aeration device, isothermal jet, simulation |
A Wedge witha Heat-Resistant Lining in a High-Speed Airflow: Comparative Estimate of the Thermal State
Authors: Aliev Az.A., Zimin V.N. , Tovstonog V.A., Tomak V.I. | Published: 01.04.2022 |
Published in issue: #1(140)/2022 | |
DOI: | |
Category: Aviation and Rocket-Space Engineering | Chapter: Aircraft Strength and Thermal Modes | |
Keywords: aircraft, aerodynamic heating, thermal protection, thermal condition, heat-resistant material |
Pneumatic Damper Multicriteria Optimization in the Free-Piston Stirling Engine Displacer
Authors: Bobylev A.V., Zenkin V.A. | Published: 01.07.2022 |
Published in issue: #2(141)/2022 | |
DOI: | |
Category: Power Engineering | Chapter: Heat Engines | |
Keywords: stirling engine, Beale engine, free-piston engines, mathematical model, thermodynamic model, pneumatic damper, multicriteria optimization |
Pneumatic Damper Multicriteria Optimization in the Free-Piston Stirling Engine Displacer
Authors: Bobylev A.V., Zenkin V.A. | Published: 01.07.2022 |
Published in issue: #2(141)/2022 | |
DOI: | |
Category: Power Engineering | Chapter: Heat Engines | |
Keywords: stirling engine, Beale engine, free-piston engines, mathematical model, thermodynamic model, pneumatic damper, multicriteria optimization |
Theoretical Assessment of Possible Reduction in Mass Leaks of Working Medium from a Reciprocating Compressor Chamber
Authors: Busarov S.S., Kobylskiy R.E., Sinitsin N.G. | Published: 01.07.2022 |
Published in issue: #2(141)/2022 | |
DOI: | |
Category: Power Engineering | Chapter: Vacuum, Compressor Technology, and Pneumatic Systems | |
Keywords: mass leaks, piston rings, leak tightness, monolithic piston, performance |
Methodology and Experience in the Primary Designing a Transsonic Axial Compressor
Authors: Borovkov A.I., Galerkin Yu.B., Solovyeva О.А., Drozdov А.А., Rekstin A.F., Soldatova K.V., Sebelev A.A. | Published: 13.09.2022 |
Published in issue: #3(142)/2022 | |
DOI: | |
Category: Power Engineering | Chapter: Vacuum, Compressor Technology, and Pneumatic Systems | |
Keywords: axial compressor, impeller, guide vane, flow coefficient, radial balance, mixing loss |