Spiral winding of ends of composite shells with cylindrical and conical shapes
| Authors: Komkov M.A., Tarasov V.A., Borodulin A.S. | Published: 10.06.2013 |
| Published in issue: #4(89)/2012 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: composite shells, kinematic parameters of winding, composite shell end | |
Prediction of longevity of parts of the PNK-320 line
| Authors: Mal’tsev A.A., Rusakov A.D., Daeva N.N. | Published: 10.06.2013 |
| Published in issue: #4(89)/2012 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: rolling mill, fatigue life, torsional vibrations, differential equations, MathCAD | |
Making of pin fin structures for boiling of nitrogen
| Authors: Zubkov N.N., Trofimovich A.S., Ovchinnikov A.I., Tsfasman G.Yu., Gorodnikov V.V. | Published: 11.06.2013 |
| Published in issue: #1(90)/2013 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: deformational cutting, boiling of nitrogen, pin fin heat-exchange structures, cryodestructor | |
Effect of technological heating on properties of martensitic-ageing steels in manufacturing of force-measuring elastic elements
| Authors: Tarasenko L.V., Unchikova M.V. | Published: 11.06.2013 |
| Published in issue: #1(90)/2013 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: martensitic-ageing steels, impact toughness, carbide grid, intercrystalline corrosion, anode polarization curves | |
Study of Stretching by Inner Surface for Increase of Efficiency of Manufacturing or Renovation of Parts of Stepwise Sleeve Type
| Authors: Vorontsov A.L., Stupnikov V.P., Strat’ev V.K. , Balahontseva N.A. | Published: 29.08.2013 |
| Published in issue: #2(83)/2011 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: stretching, inner surface of hollow blank, stepwise sleeve, optimal angles of taper of a punch, stresses | |
Analysis of Radial Deviations of the Part Profile from Nominal Circle in Multi-Cutter Treatment at Birotor Machines
| Authors: Ivanov V.S., Ivanov D.V. | Published: 29.08.2013 |
| Published in issue: #3(84)/2011 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: part profile, multi-cutter treatment, birotor machine, composition of forming trajectories, cycloid polyhedron, radial deviation | |
Mathematical Simulation of Nonisothermal Hardening of Polymeric Composite Structures of Rocket and Space Machinery
| Authors: Tarasov V.A., Belyakov Ye.V. | Published: 29.08.2013 |
| Published in issue: #1(82)/2011 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: polymeric composite materials, hardening process, kinetic and reologic characteristics | |
Profiling of Worm-Modular Milling Tools for Correctional Straight-Toothed Pinion Cutters
| Authors: Demidov V.V. | Published: 11.09.2013 |
| Published in issue: #1(86)/2012 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: worm-modular milling tool, correctional straight-toothed pinion cutter, tooth-profile angle of a pinion cutter, accuracy of the pinion-cutter tooth profile, imitating computer simulation | |
Estimation of Geometric Parameters of Formed Surface during Hydro-Abrasive Treatment
| Authors: Tarasov V.A., Polukhin A.N. | Published: 11.09.2013 |
| Published in issue: #1(86)/2012 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: hydro-abrasive treatment, abrasive-liquid jet, technological regimes of treatment, geometric features of the treated surface, processing along a curvilinear contour | |
Process of Chip Forming in Cutting of Polymer Composite Materials with Fibrous Fillers
| Authors: Yaroslavtsev V.M. | Published: 11.09.2013 |
| Published in issue: #2(87)/2012 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: polymer composite materials, chip forming, regularities of deformation and destruction, surface quality, hairiness of the processed surface | |