Design method for hot-rolling mill roll profiles. Part 1. Theoretical grounds of the method
| Authors: Borisov V.I., Varikov V.A. | Published: 29.03.2015 |
| Published in issue: #3(36)/1999 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: | |
Induction-metallurgic method for hardening the large surfaces
| Authors: Zaichenko Yu.A., Kazennov N.P., Kazintsev N.V., Kosarevsky V.V., Khoruzhy G.A. | Published: 29.03.2015 |
| Published in issue: #3(36)/1999 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: | |
Production of silicon for solar battery by two-stage carbo-thermal method
| Authors: Abdiukhanov I.М., Bogachev Е.А., Ivanov Yu.A. | Published: 29.03.2015 |
| Published in issue: #3(36)/1999 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: | |
Normalisation of force displacements
| Authors: Cherniansky P.M., Paspopova N.P. | Published: 29.03.2015 |
| Published in issue: #2(35)/1999 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: | |
Efficiency of the strain hardening of the rose steels
| Authors: Pakhomova S.A., Ryzhov N.M. | Published: 29.03.2015 |
| Published in issue: #2(35)/1999 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: | |
Increase in wear resistance of misaligned screw mechanisms by the technological procedures
| Authors: Kirichek A.V., Kulkov I.B., Chernaya L.A. | Published: 29.03.2015 |
| Published in issue: #2(35)/1999 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: | |
Formation of dimensional accuracy on investment casting
| Authors: Rybkin V.A., Volnov I.N. | Published: 29.03.2015 |
| Published in issue: #2(35)/1999 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: | |
Development of the restoration procedure and hardening of highly loaded friction parts of the vehicles by induction-metallurgical method
| Authors: Zaichenko Yu.A., Kazennov N.P., Kazintsev N.V., Kosarevsky V.V. | Published: 29.03.2015 |
| Published in issue: #2(35)/1999 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: | |
Analytical estimating accurate profile of disk tools for processing helical surfaces
| Authors: Malevsky N.P., Gaevoy А.Р. | Published: 30.03.2015 |
| Published in issue: #1(34)/1999 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: | |
Development of dual-beam laser hardening optimization algorithm for steels
| Authors: Safonov A.N., Meleschenko K.V. | Published: 30.03.2015 |
| Published in issue: #1(34)/1999 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: | |