Analysis of Change in Strip Geometry under Condition of Profile Bending
| Authors: Punin V.I. | Published: 11.09.2013 |
| Published in issue: #2(87)/2012 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: bending process, radius of curvature, rolls, caliber calculation | |
The Study of Process and the Development of Equipment for Sealing of Photoreceiver Housing
| Authors: Atamanov V.N. | Published: 11.09.2013 |
| Published in issue: #2(87)/2012 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: photoreceivers, seam welding, current supply, recrystallization, tightness, kinematic scheme, efficiency | |
Study of Deformation Type in the Area of Chip Formation in Case of Cutting with Leading Plastic Deforming
| Authors: Yaroslavtseva N.A. | Published: 11.09.2013 |
| Published in issue: #3(88)/2012 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: inhomogeneous material properties, chip formation, leading plastic deforming, deformation type, computational deformation model | |
Strength of fibrous composites with nanomodified filler
| Authors: Stepanishchev N.A., Tarasov V.A., Boyarskaya R.V., Romanenkov V.A., Kuchina Yu.V. | Published: 11.09.2013 |
| Published in issue: #3(92)/2013 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: hybrid composite material, carbon nanotubes (CNTs), modification of fibrous filler, increase in the strength of material | |
Provision of Technological Reliability of Turning Lathes by Monitoring of Parameters of Trajectories of Support-Group Movements
| Authors: Vasiliev G.N., Yagopol | Published: 27.09.2013 |
| Published in issue: #2(79)/2010 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: turning lathes, program method of testing, support, support movement trajectory, test and diagnostics complex, interactive diagnostic system | |
Influence of Magnetic-Pulse Processing on Plasticity of Diffusion Chrome-Aluminized Coatings
| Authors: Simonov V.N. , Unchikova M.V., Shkretov Yu.P., Velishchanskii A.V. | Published: 07.10.2013 |
| Published in issue: #3(80)/2010 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: magnetic-pulse processing, structure of inter-phase boundaries, longeivity of diffusion coatings | |
Theoretical Study of Process of Sheet Blanking by Elastic Working Tool
| Authors: Semenov I.Ye., Ryzhenko S.N., Daeva N.N. | Published: 08.10.2013 |
| Published in issue: #4(81)/2010 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: blanking, sheet metal, elastic tool, simulation | |
Analysis of Change of Electrolyte Concentration in Technological Operation Module for Nickel-Plating with Multistage System of Parts Rinsing
| Authors: Tarasov V.A., Alekseev A.N., Korolev A.N., Tsebro Yu.A. | Published: 08.10.2013 |
| Published in issue: #4(81)/2010 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: nickel-plating, rinsing system, electrolyte concentration, operation module | |
Simulation of Mould Processe at Profile-Bending Mill with Elastic and Rigid Tools
| Authors: Semenov I.Ye., Ryzhenko S.N., Povorov S.V. | Published: 08.10.2013 |
| Published in issue: #4(81)/2010 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: moulding, elastic tool, heat exchange apparatus, mathematical simulation | |
Analysis of Properties and Peculiarities of Functioning of Highly Porous Insulating Materials Based on Basalt Fiber
| Authors: Tarasov V.A., Timofeev M.P., Yermakova Yu.V., Boyarskaya R.V. | Published: 20.11.2013 |
| Published in issue: #4(93)/2013 | |
| DOI: | |
| Category: Production Process Procedures and Machines | |
| Keywords: highly porous heat-insulating material, method of filtration deposition, stationary heat-transfer regime, coefficient of thermal conductivity of highly porous composite structure | |