Влияние сжимаемости снаряжения на параметры его состояния при проникании ударника в бетонную преграду

12 / 13

Влияние сжимаемости снаряжения на параметры его состояния…
ISSN 0236-3941. Вестник МГТУ им. Н.Э. Баумана. Сер. Машиностроение. 2017. № 5 39
[2] Ben-Dor G., Dubinsky A., Elperin T. Analytical engineering models for predicting high
speed penetration of hard projectiles into concrete shields: A review. International Journal of
Damage Mechanics, 2015, vol. 24, no. 1, pp. 76–94. DOI: 10.1177/1056789514521647
Available at:
[3] Veldanov V.A., Markov V.A., Pusev V.I., Ruchko A.M., Sotskiy M.Yu., Fedorov S.V. Com-
putation of nondeformable striker penetration into low-strength obstacles using piezoelectric
accelerometry data. Technical Physics, 2011, vol. 56, no. 7, pp. 992–1002.
DOI: 10.1134/S1063784211070231
Available at:
[4] Fedorov S.V., Fedorova N.A. Influence of the soil and rocky target strength properties on
projectiles penetration depth with additional action of the jet thrust impulse. Vestn. Mosk. Gos.
Tekh. Univ. im. N.E. Baumana, Mashinostr. [Herald of the Bauman Moscow State Tech. Univ.,
Mech. Eng.], 2016, no. 4, pp. 40–56 (in Russ.). DOI: 10.18698/0236-3941-2016-4-40-56
[5] Fedorov S.V., Fedorova N.A., Veldanov V.A. Using jet propulsion burn to increase re-
search module penetration distance into low-strength ground obstacles. Izvestiya RARAN,
2014, no. 4, pp. 53–63 (in Russ.).
[6] Babkin A.V., Kolpakov V.I., Okhitin V.N., Selivanov V.V. Prikladnaya mekhanika splo-
shnykh sred: V 3 t. T. 3. Chislennye metody v zadachakh fiziki bystroprotekayushchikh
protsessov. Moscow, Bauman MSTU Publ., 2006. 520 p.
[7] Oran E.S., Boris J.P. Numerical simulation of reactive flow. Elsevier, 1987. 601 p.
[8] Fedorov S.V. On cut-off possibility of high-speed metal jet precursor region in process of
shaped charge explosion in axial magnetic field. Boepripasy i vysokoenergeticheskie kondensiro-
vannye sistemy, 2008, no. S2, pp. 73–80 (in Russ.).
[9] Fedorov S.V., Veldanov V.A., Smirnov V.E. Influence numerical analysis of velocity and
strength of high density alloy elongated projectiles on their penetration depth into the steel
target. Vestn. Mosk. Gos. Tekh. Univ. im. N.E. Baumana, Mashinostr. [Herald of the Bauman
Moscow State Tech. Univ., Mech. Eng.], 2015, no. 1, pp. 65–83 (in Russ.).
DOI: 10.18698/0236-3941-2015-1-65-83
[10] Wilkins M.L. Calculation of elastic-plastic flow. In: Fundamental methods in hydrody-
namics. Vol. 3. New York, London, Academic Press, 1964. 386 p.
[11] Fedorov S.V., Bayanova Ya.M., Ladov S.V. Numerical analysis of the effect of the geo-
metric parameters of a combined shaped-charge liner on the mass and velocity of explosively
formed compact elements. Combustion, Explosion, and Shock Waves, 2015, vol. 51, no. 1,
pp. 130–142. DOI: 10.1134/S0010508215010141
Available at:
[12] Fedorov S.V., Veldanov V.A. Determination of the dimension of a cavity in water behind
a fast-moving cylindrical body. Technical Physics, 2013, vol. 58, no. 2, pp. 165–169.
DOI: 10.1134/S1063784213020072
Available at:
[13] Fedorov S.V., Veldanov V.A. Application of segmented strikers for cavern forming in
ground-rock obstacles. Izvestiya RARAN, 2012, no. 1, pp. 43−50 (in Russ.).
[14] Zhernokletov M.V., ed. Metody issledovaniya svoystv materialov pri intensivnykh
dinamicheskikh nagruzkakh [Methods of material properties research under intense dynamic
loads]. Sarov, RFYaTs-VNIIEF Publ., 2005. 428 p.