В.М. Ярославцев
104
ISSN 0236-3941. Вестник МГТУ им. Н.Э. Баумана. Сер. Машиностроение. 2016. № 6
[9] Yaroslavtsev V.M. Dimensional processing of wear-resistance and thermoerosion coatings.
Part 2.
Remont, vosstanovlenie, modernizatsiya
[Repair, Reconditioning, Modernization],
2003, no. 11, pp. 27–33 (in Russ.).
[10]
Yaroslavtsev V.M. Dimensional processing of wear-resistance and thermoerosion coatings.
Part 3.
Remont, vosstanovlenie, modernizatsiya
[Repair, reconditioning, modernization], 2003,
no. 12, pp. 30–35 (in Russ.).
[11]
Bobrov V.F., Ierusalimskiy D.E. Rezanie metallov samovrashchayushchimisya reztsami
[Metal cutting with autorotative cutters]. Moscow, Mashinostroenie Publ., 1972. 112 p.
[12]
Konovalov E.G., Sidorenko V.A., Sous' A.V. Progressivnye skhemy rotatsionnogo re-
zaniya metallov [Overlapping tooth design for rotary metal cutting]. Minsk, Nauka i tekhnika
Publ., 1972. 272 p.
[13]
Poduraev V.N., Kamalov V.S. Fiziko-khimicheskie metody obrabotki [Physical-chemical
processing methods]. Moscow, Mashinostroenie Publ., 1973. 346 p.
[14]
Gatitulin M.N., Portnyagin V.I. Rotatsionnye rezhushchie instrumenti. Sb. Progressivnye
tekhnologii v mashinostroenii [Rotary cutting tools. In: Advanced technologies in mechanical
engineering]. Chelyabinsk, SUSU Publ., 2005. Pp. 33–39.
[15]
Popov
M.Yu., Alekseenko D.A., Evtukhov S.N. Special rotary cutting tool.
Vestnik
YuUrGU. Ser. Mashonostroeniye
[Bulletin of the SUSU. Ser. Mechanical Engineering Indus-
try], 2012, no. 33, pp. 154–156 (in Russ.).
[16]
Poduraev V.N. Rezanie trudnoobrabatyvaemykh materialov [Hard-to-cut materials cut-
ting]. Moscow, Vysshaya shkola Publ., 1974. 587 p.
[17]
Yaroslavtsev V.M., Sabel'nikov V.V., Gusenko
A.Yu. Reztsovaya opravka dlya tocheniya
trudnoobrabatyvaemykh materialov [Cutting arbor for hard-to-cut materials turning].
Mash-
iny. Pribory. Stendy
, 1984, no. 9, p. 67 (in Russ.).
Yaroslavtsev V.M.
— Dr. Sci. (Eng.), Professor of Material Processing Technologies Depart-
ment, Bauman Moscow State Technical University (2-ya Baumanskaya ul. 5, Moscow, 105005
Russian Federation).
Рlease cite this article in English as:
Yaroslavtsev V.M. A Tool for Finish Turning of Plasma-Sprayed Materials.
Vestn. Mosk. Gos.
Tekh. Univ. im. N.E. Baumana, Mashinostr.
[Herald of the Bauman Moscow State Tech. Univ.,
Mech. Eng.], 2016, no. 6, pp. 96–104. DOI: 10.18698/0236-3941-2016-6-96-104