19 / 20
Особенности получения сталеалюминиевых соединений методами сварки плавлением
ISSN 0236-3941. Вестник МГТУ им. Н.Э. Баумана. Сер. Машиностроение. 2016. № 4
111
[8] Kobayashi S., Yakou T. Control of intermetallic compound layers at interface
between steel and aluminum by diffusion-treatment.
Material Science
, 2002, vol. 338, iss. 1–2,
pp. 44–53.
[9] Taban E., Gould J.E., Lippold J.C. Dissimilar friction welding of 6061-T6 aluminum and
AISI 1018 steel: properties and microstructural characterization.
Materials and Design
, 2010,
vol. 31, iss. 5, pp. 2305–2311.
[10] Karfoul M.K., Gordon J.T., Murray R.T. The behavior of iron and aluminum during the
diffusion welding of carbon steel to aluminum.
Journal of Materials Science
, 2007, vol. 42,
iss. 14, pp. 5692–5699.
[11] Dong H.G., Yang L.Q., Dong C., Kou S. Arc joining of aluminum alloy to stainless steel
with flux-cored Zn-based filler metal.
Mater. Science and Engineering
, 2010, vol. 527, iss. 26,
pp. 7151–7154.
[12] Gungor B., Kaluc E., Taban E., Sik A. Mechanical and microstructural properties of
robotic Cold Metal Transfer (CMT) welded 5083-H111 and 6082-T651 aluminum alloys.
Materials and Design
, 2014, vol. 54, pp. 207–211.
[13] Rattana B., Mitsomwang P., Rattanachan S., Mutoh Y. Feasibility of using tig welding in
dissimilar metals between steel
/
aluminum alloy.
Energy Research Journal
, 2010, vol. 1,
iss. 2, pp. 82–86.
[14] Khorunov V.F., Sabash O.M. Flux Arc Brazing of aluminum to gaivanized steel.
Paton
Welding Journal
, 2013, no. 2, pp. 31–36.
[15
Ryabov V.R., Yumatova V.I., Butnik A.L., Grabin V.F., Kuznetsov E.P., Belozerov L.F. The
effect of alloying elements in steel on properties of steel-aluminum welded joints.
Svarochnoe Proizvodstvo
[Welding International], 1971, no. 4, pp. 9–12 (in Russ.).
[16] Donga H., Hua W., Duana Y., Wang X., Dong C. Dissimilar metal joining of aluminum
alloy to galvanized steel with Al–Si, Al–Cu, Al–Si–Cu and Zn–Al filler wires.
Journal of Mate-
rials Processing Technology
, 2012, vol. 212, iss. 2, pp. 458–454.
[17] Shankar S., Apelian D. Die Soldering: Mechanism of the interface reaction between
molten aluminum alloy and tool steel.
Metallurgical and materials transactions b-process
metallurgy and materials processing science
, 2002, vol. 33, iss. 3, pp. 465–476.
[18] Ryabov V.R. Svarka plavleniem alyuminiya so stal'yu [Fusion Welding Aluminum to
Steel]. Kiev, Nauk. Dumka Publ., 1969. 231 p.
[19] Gatzen M., Radel T., Thomy C., Vollertsen F. Wetting behavior of eutectic Al–Si droplets
on zinc coated steel substrates.
Journal of Materials Processing
Technology
, 2014, vol. 214,
iss. 1, pp. 123–131.
Kovalev V.V.
— post-graduate student, assistant of Welding and Diagnostic Technology
Department, Bauman Moscow State Technical University (2-ya Baumanskaya ul. 5, Moscow,
105005 Russian Federation).
Mikheev R.S.
— Cand. Sci. (Eng.), Assoc. Professor of Welding and Diagnostic Technology
Department, Bauman Moscow State Technical University (2-ya Baumanskaya ul. 5, Moscow,
105005 Russian Federation).