MainCatalogMechanical Engineering and Machine ScienceTechnology and Equipment of Mechanical and Physical Processing
Chemical Nickel Plating Technology for Product Surfaces
| Authors: Skryabin V.A., Zverovshchikov A.E. | Published: 03.04.2022 |
| Published in issue: #1(140)/2022 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: nickel-phosphorus coating, processing, planning, experiment, wear resistance | |
Investigation of Cutting Forces for Thin Layers when Planing and Milling
| Authors: Shevchenko A.Yu., Popov A.Yu., Drozdov I.N., Blokhin D.A., Kisel A.G., Nekrylov E.V. | Published: 20.12.2021 |
| Published in issue: #4(139)/2021 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: cutting forces, universal dynamometer, planing, milling, small chip sections, lubricating coolant | |
Experience in Manufacturing Titanium Alloy Forgins in VIAM Plant Conditions
| Authors: Kashapov O.S., Pavlova T.V., Kalashnikov V.S., Lysov K.G. | Published: 28.03.2021 |
| Published in issue: #1(136)/2021 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: titanium alloys, isothermal forging, microstructure, mechanical properties, thermomechanical treatment, calibration, double annealing | |
Effect of Autoclave Processing Parameters used to Form Hybrid SIAL Parts on the Structure and Properties of Al-Li Alloy 1441 Sheets
| Authors: Serebrennikova N.Yu., Konovalov A.N., Sudarchikova M.A., Karpukhin S.D., Kolmakov A.G. | Published: 07.06.2020 |
| Published in issue: #3(132)/2020 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: SIAL hybrid composite material, Al-Li alloy 1441, heat treatment, aging | |
Technology of Magnetron Deposition of Nanosized High-Barrier Relative Oxygen Aluminium Oxide Coating on Roll Pet Film
| Authors: Panchenko V.P., Dyachkov A.L., Korolev S.P, Kravchuk K.S., Sadogursky M.N., Seidman L.A. | Published: 30.04.2020 |
| Published in issue: #2(131)/2020 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: magnetron deposition, aluminum oxide, nanosized layer, PET film, facility, mode of operation, technology, permeability, AFM-image | |
Investigating Corrosion Resistance of Heavy-Duty Steel Fasteners Regarding Assemblies Operating in Maritime Climates under High Pressures Power, Metallurgical and Chemical Engineering
| Authors: Nedashkovskiy K.I., Gulshin A.V., Averina Yu.M., Naumkina V.A., Menshikov V.V., Boldyrev V.S. | Published: 18.02.2020 |
| Published in issue: #1(130)/2020 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: corrosion cracking, fasteners, maritime climate, heat treatment, stainless steel, bolts | |
Modernization of the System for Measuring Cutting Forces on the Basis of UDM Dynamometer Series
| Authors: Samoylov V.B. | Published: 17.10.2019 |
| Published in issue: #5(128)/2019 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: modernization, dynamometer, cutting force, virtual instrument | |
Computing Stress-Strain State of a Workpiece During Drawing with Wall Thinning Through a Die with a Small Taper Angle
| Authors: Vinnik P.M., Remshev E.Yu., Zaterukha E.V., Filin D.S. | Published: 05.09.2019 |
| Published in issue: #4(127)/2019 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: drawing with wall thinning, stress-strain state, deformation, die with a small taper angle, monotone process | |
Ensuring the Quality of Treatment of Holes in Products from Polymeric Composite Materials
| Authors: Yaroslavtsev V.M. | Published: 22.07.2019 |
| Published in issue: #3(126)/2019 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: polymer composite materials, hole processing, hole edges, quality of processing, cutting with additional technological coating, cutting with thermo-mechanical impact, drill with additional cutting edges | |
Form-Relieving Method for Thread Mills
| Authors: Malkov O.V., Pavlyuchenkov I.A., Smirnov Al.A. | Published: 22.04.2019 |
| Published in issue: #2(125)/2019 | |
| DOI: | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing | |
| Keywords: thread mill, thread, relieving, form-relieved mill | |