High Temperature Nitriding Effect on Structure and Properties of Welded Nickel Superalloys
| Authors: Kozlova O.Yu., Ovsepyan S.V., Pomelnikova A.S., Akhmedzyanov M.V. | Published: 06.12.2016 |
| Published in issue: #6(111)/2016 | |
| DOI: | |
| Category: Metallurgy and Science of Materials | Chapter: Metal Science, Thermal Processing of Metals and Alloys | |
| Keywords: thermo-chemical treatment, high-temperature nitriding, nitrides, structure, nickel superalloys, microhardness, prolonged heat resistance | |
Variable Controled Temperature Gradient Effect on the Features of Structure, Phase Composition, Properties of High-Temperature Superalloys in Their Directional Solidification
| Authors: Kablov E.N., Bondarenko Yu.A., Echin A.B. | Published: 06.12.2016 |
| Published in issue: #6(111)/2016 | |
| DOI: | |
| Category: Metallurgy and Science of Materials | Chapter: Metal Science, Thermal Processing of Metals and Alloys | |
| Keywords: directional solidification, temperature gradient, a nickel single crystal superalloy, reinforcing gamma’-phase, gamma/gamma’ eutectic, dendrite segregation, micro-porosity, short-term strength, long-term strength | |
Creation of Intermetallic Nickel Alloys and Composite Materials on their Basis
| Authors: Ospennikova O.G., Bazyleva O.A., Arginbaeva E.G., Shestakov A.V., Turenko E.Yu. | Published: 26.05.2017 |
| Published in issue: #3(114)/2017 | |
| DOI: | |
| Category: Metallurgy and Science of Materials | Chapter: Powder Metallurgy and Composite Materials | |
| Keywords: nickel aluminide, intermetallic nickel alloy, single crystal, mathematical simulation, composite material, dispersion hardening, mechanical alloying, extrusion, rolling, microstructure | |
Phase Analysis and Optical Functions of Composites Based on Low-Density Polyethylene with Fillers of Biological Origin
| Authors: Godzhaev E.M., Alieva Sh.V., Salimova V.V. | Published: 26.05.2017 |
| Published in issue: #3(114)/2017 | |
| DOI: | |
| Category: Metallurgy and Science of Materials | Chapter: Powder Metallurgy and Composite Materials | |
| Keywords: surface microrelief, X-ray phase analysis, dielectric permittivity, optical functions | |
Tribo-Fatigue Testing of Paint Coating
| Authors: Aliyev A.A. | Published: 09.02.2018 |
| Published in issue: #1(118)/2018 | |
| DOI: | |
| Category: Metallurgy and Science of Materials | Chapter: Material Science | |
| Keywords: paint coating, fatigue, fatigue strength, thin film, tribo-fatigue testing, stress-strain state, bending, stretching, durability, polyester-urethanе | |
Investigating the Effect of Plastic Deformation on Acoustic and Magnetic Properties of Austenitic and Duplex Steel
| Authors: Klyushnikov V.A., Mishakin V.V. | Published: 10.04.2018 |
| Published in issue: #2(119)/2018 | |
| DOI: | |
| Category: Metallurgy and Science of Materials | Chapter: Metal Science, Thermal Processing of Metals and Alloys | |
| Keywords: plastic deformation, austenitic steel, duplex stainless steel, martensitic transformation, acoustic properties, strain rate, eddy current method | |
Numerical Simulation of Thermal Physical Processes During Surface Layer Modification in Metal Subjected to Induction Heating
| Authors: Popov V.N., Schukin V.G., Boyko O.A. | Published: 10.04.2018 |
| Published in issue: #2(119)/2018 | |
| DOI: | |
| Category: Metallurgy and Science of Materials | Chapter: Metal Science, Thermal Processing of Metals and Alloys | |
| Keywords: metal modification, induction treatment, heat transfer, nanoscale refractory particles, numerical simulation | |