MainCatalogMetallurgy and Science of MaterialsMetal Science, Thermal Processing of Metals and Alloys
Numerical Simulation of Thermal Physical Processes During Surface Layer Modification in Metal Subjected to Induction Heating
Authors: Popov V.N., Schukin V.G., Boyko O.A. | Published: 10.04.2018 |
Published in issue: #2(119)/2018 | |
DOI: | |
Category: Metallurgy and Science of Materials | Chapter: Metal Science, Thermal Processing of Metals and Alloys | |
Keywords: metal modification, induction treatment, heat transfer, nanoscale refractory particles, numerical simulation |
Investigating the Effect of Plastic Deformation on Acoustic and Magnetic Properties of Austenitic and Duplex Steel
Authors: Klyushnikov V.A., Mishakin V.V. | Published: 10.04.2018 |
Published in issue: #2(119)/2018 | |
DOI: | |
Category: Metallurgy and Science of Materials | Chapter: Metal Science, Thermal Processing of Metals and Alloys | |
Keywords: plastic deformation, austenitic steel, duplex stainless steel, martensitic transformation, acoustic properties, strain rate, eddy current method |
Variable Controled Temperature Gradient Effect on the Features of Structure, Phase Composition, Properties of High-Temperature Superalloys in Their Directional Solidification
Authors: Kablov E.N., Bondarenko Yu.A., Echin A.B. | Published: 06.12.2016 |
Published in issue: #6(111)/2016 | |
DOI: | |
Category: Metallurgy and Science of Materials | Chapter: Metal Science, Thermal Processing of Metals and Alloys | |
Keywords: directional solidification, temperature gradient, a nickel single crystal superalloy, reinforcing gamma’-phase, gamma/gamma’ eutectic, dendrite segregation, micro-porosity, short-term strength, long-term strength |
High Temperature Nitriding Effect on Structure and Properties of Welded Nickel Superalloys
Authors: Kozlova O.Yu., Ovsepyan S.V., Pomelnikova A.S., Akhmedzyanov M.V. | Published: 06.12.2016 |
Published in issue: #6(111)/2016 | |
DOI: | |
Category: Metallurgy and Science of Materials | Chapter: Metal Science, Thermal Processing of Metals and Alloys | |
Keywords: thermo-chemical treatment, high-temperature nitriding, nitrides, structure, nickel superalloys, microhardness, prolonged heat resistance |
Processes of Recrystallization in Austenitic Alloy Obtained by Methods of Selective Laser Melting
Authors: Bazaleeva K.O., Tsvetkova E.V., Balakirev E.V. | Published: 19.10.2016 |
Published in issue: #5(110)/2016 | |
DOI: | |
Category: Metallurgy and Science of Materials | Chapter: Metal Science, Thermal Processing of Metals and Alloys | |
Keywords: selective laser melting, austenitic steel, thermal stability, defectiveness |
Structural Features of Ingots Made of Al-Cu-Li System Alloys Depending on its Chemical Composition
Authors: Kolobnev N.I., Ryabova E.N., Khokhlatova L.B., Oglodkov M.S. | Published: 12.06.2016 |
Published in issue: #3(108)/2016 | |
DOI: | |
Category: Metallurgy and Science of Materials | Chapter: Metal Science, Thermal Processing of Metals and Alloys | |
Keywords: ingots, Al-Cu-Li system alloys, heat treatment, phase composition, thermodynamic diagram |
Influence of Heat Treatment on the Structure and Properties of a High-Temperature Intermetallic Nickel-Based Alloy
Authors: Arginbaeva E.G., Bazyleva O.A., Timofeeva O.B., Nazarkin R.M. | Published: 12.06.2016 |
Published in issue: #3(108)/2016 | |
DOI: | |
Category: Metallurgy and Science of Materials | Chapter: Metal Science, Thermal Processing of Metals and Alloys | |
Keywords: intermetallic compound Ni3Al, microstructure, single-crystal samples, crystallographic orientation, heat treatment, lattice parameter, misfit, long-term strength |
Quality improvement of chrome-calorizing coatings, obtained with gas-circulating
Authors: Simonov V.N. , Unchikova M.V., Pakhomova S.A. | Published: 29.03.2016 |
Published in issue: #2(107)/2016 | |
DOI: | |
Category: Metallurgy and Science of Materials | Chapter: Metal Science, Thermal Processing of Metals and Alloys | |
Keywords: heat resistance, combined mass transfer, aluminium oxide, thermodynamical stress, residual pressure, oxygen getter |
Influence of heat treatment mode on corrosive characteristics of aluminium alloy V1341
Authors: Puchkov Yu.A., Pham Hong Phu | Published: 29.03.2016 |
Published in issue: #2(107)/2016 | |
DOI: | |
Category: Metallurgy and Science of Materials | Chapter: Metal Science, Thermal Processing of Metals and Alloys | |
Keywords: thermal hardening, aluminium alloys, isothermal quenching, decomposition, saturated solid solution, simulation, kinetics, electrochemical corrosion |
Effect of high-temperature annealing on structure and properties of Ni3Al intermetallic compound in alloys
Authors: Bazyleva O.A., Arginbaeva E.G., Unchikova M.V., Kostenko Yu.V. | Published: 14.02.2016 |
Published in issue: #1(106)/2016 | |
DOI: | |
Category: Metallurgy and Science of Materials | Chapter: Metal Science, Thermal Processing of Metals and Alloys | |
Keywords: intermetallic compound Ni3Al, high-temperature annealing, long-term strength |