Ozone Resistance of Aircraft Interior Materials
| Authors: Aliyev A.A., Аmpilogov A.Yu. | Published: 09.02.2015 |
| Published in issue: #1(100)/2015 | |
| DOI: | |
| Category: Metallurgy and Science of Materials | Chapter: Material Science | |
| Keywords: ozonation, sanitation, cabin, interior, kevlar, BMS 8381 L-728B, BMS 8381 L-728B-220A, BMS 8-264 STYLE 285, BMS 8-270 ROTOMOLD, BMS 8-300 TYPE 2 GR5, silicone rubber, aramid fabrics, polyamide, polyimide, ozone resistance | |
Modification of Heat-Resistant Epoxy Resins by Carbon Nanotubes
| Authors: Marakhovskiy P.S., Kondrashov S.V., Akatenkov R.V., Aleksashin V.M., Anoshkin I.V., Mansurova I.A. | Published: 15.04.2015 |
| Published in issue: #2(101)/2015 | |
| DOI: | |
| Category: Metallurgy and Science of Materials | Chapter: Nanotechnologies and Nanomaterials Material Science | |
| Keywords: carbon nanotubes, epoxy resin, nanocomposite, glass transition temperature, elasticity modulus at bending | |
Influence of Structure Parameters of Semi-Finished BT41 Alloy Products on Mechanical Properties
| Authors: Kashapov O.S., Pavlova T.V. | Published: 15.04.2015 |
| Published in issue: #2(101)/2015 | |
| DOI: | |
| Category: Metallurgy and Science of Materials | Chapter: Material Science | |
| Keywords: near-alpha titanium alloy, mechanical properties, microstructure, bar, forging | |
Effect of high-temperature annealing on structure and properties of Ni3Al intermetallic compound in alloys
| Authors: Bazyleva O.A., Arginbaeva E.G., Unchikova M.V., Kostenko Yu.V. | Published: 14.02.2016 |
| Published in issue: #1(106)/2016 | |
| DOI: | |
| Category: Metallurgy and Science of Materials | Chapter: Metal Science, Thermal Processing of Metals and Alloys | |
| Keywords: intermetallic compound Ni3Al, high-temperature annealing, long-term strength | |
Influence of heat treatment mode on corrosive characteristics of aluminium alloy V1341
| Authors: Puchkov Yu.A., Pham Hong Phu | Published: 29.03.2016 |
| Published in issue: #2(107)/2016 | |
| DOI: | |
| Category: Metallurgy and Science of Materials | Chapter: Metal Science, Thermal Processing of Metals and Alloys | |
| Keywords: thermal hardening, aluminium alloys, isothermal quenching, decomposition, saturated solid solution, simulation, kinetics, electrochemical corrosion | |
Quality improvement of chrome-calorizing coatings, obtained with gas-circulating
| Authors: Simonov V.N. , Unchikova M.V., Pakhomova S.A. | Published: 29.03.2016 |
| Published in issue: #2(107)/2016 | |
| DOI: | |
| Category: Metallurgy and Science of Materials | Chapter: Metal Science, Thermal Processing of Metals and Alloys | |
| Keywords: heat resistance, combined mass transfer, aluminium oxide, thermodynamical stress, residual pressure, oxygen getter | |
Influence of Heat Treatment on the Structure and Properties of a High-Temperature Intermetallic Nickel-Based Alloy
| Authors: Arginbaeva E.G., Bazyleva O.A., Timofeeva O.B., Nazarkin R.M. | Published: 12.06.2016 |
| Published in issue: #3(108)/2016 | |
| DOI: | |
| Category: Metallurgy and Science of Materials | Chapter: Metal Science, Thermal Processing of Metals and Alloys | |
| Keywords: intermetallic compound Ni3Al, microstructure, single-crystal samples, crystallographic orientation, heat treatment, lattice parameter, misfit, long-term strength | |
Structural Features of Ingots Made of Al-Cu-Li System Alloys Depending on its Chemical Composition
| Authors: Kolobnev N.I., Ryabova E.N., Khokhlatova L.B., Oglodkov M.S. | Published: 12.06.2016 |
| Published in issue: #3(108)/2016 | |
| DOI: | |
| Category: Metallurgy and Science of Materials | Chapter: Metal Science, Thermal Processing of Metals and Alloys | |
| Keywords: ingots, Al-Cu-Li system alloys, heat treatment, phase composition, thermodynamic diagram | |
Processes of Recrystallization in Austenitic Alloy Obtained by Methods of Selective Laser Melting
| Authors: Bazaleeva K.O., Tsvetkova E.V., Balakirev E.V. | Published: 19.10.2016 |
| Published in issue: #5(110)/2016 | |
| DOI: | |
| Category: Metallurgy and Science of Materials | Chapter: Metal Science, Thermal Processing of Metals and Alloys | |
| Keywords: selective laser melting, austenitic steel, thermal stability, defectiveness | |
Improved Technology for Heat-Shielding Coating Application onto Turbine Blades
| Authors: Zakharov B.M., Bureev I.A. | Published: 19.10.2016 |
| Published in issue: #5(110)/2016 | |
| DOI: | |
| Category: Metallurgy and Science of Materials | Chapter: Material Science | |
| Keywords: heat-shielding coatings, electron-beam physical vapour deposition (EB-PVD), ASPS-process | |