Creation of Intermetallic Nickel Alloys and Composite Materials on their Basis

Authors: Ospennikova O.G., Bazyleva O.A., Arginbaeva E.G., Shestakov A.V., Turenko E.Yu. Published: 26.05.2017
Published in issue: #3(114)/2017  

DOI: 10.18698/0236-3941-2017-3-75-89

Category: Metallurgy and Science of Materials | Chapter: Powder Metallurgy and Composite Materials  
Keywords: nickel aluminide, intermetallic nickel alloy, single crystal, mathematical simulation, composite material, dispersion hardening, mechanical alloying, extrusion, rolling, microstructure

The study shows the main directions and results of research into the development of high-temperature alloys based on nickel aluminides, composites based on them and technologies for manufacturing semi-finished products from these materials.


[1] Kablov E.N. Innovative developments of FSUE "VIAM" SSC of RF on realization of "Strategic directions of the development of materials and technologies of their processing for the period until 2030". Aviatsionnye materialy i tekhnologii [Aviation Materials and Technologies], 2015, no. 1, pp. 3-33 (in Russ.).

[2] Kablov E.N. Strategical areas of developing materials and their processing technologies for the period up to 2030. Aviatsionnye materialy i tekhnologii [Aviation Materials and Technologies], 2012, no. S, pp. 7-17 (in Russ.).

[3] Kablov E.N., Ospennikova O.G., Bazyleva O.A. Materials for parts of gas turbine engines under high heat loads. Vestn. Mosk. Gos. Tekh. Univ. im. N.E. Baumana, Mashinostr. [Herald of the Bauman Moscow State Tech. Univ., Mechan. Eng.], 2011, no. SP2, pp. 13-19 (in Russ.).

[4] Bazyleva O.A., Arginbaeva E.G., Turenko E.Yu. High-temperature casting intermetallic alloys. Aviatsionnye materialy i tekhnologii [Aviation Materials and Technologies], 2012, no. S, pp. 57-60 (in Russ.).

[5] Povarova K.B., Bazyleva O.A., Drozdov A.A., Alad’yev N.A., Samsonova M.A. Research on low-cycle fatigue of intermetallic alloy based on Ni3Al of VKNA-25 type at room temperature. Metally, 2012, no. 6, pp. 70-81 (in Russ.). Available at: http://viam.ru/public/files/2011/2011-205961.pdf

[6] Bazyleva O.A., Goryunov A.V., Zagvozdkina T.N., Nefedov D.G. Evaluation of effect of segregation inhomogeneity in single crystals of BKHA-4y alloy on its structure and properties. Metallurgiya mashinostroeniya [Metallurgy of Machinery Building], 2012, no. 3, pp. 18-21 (in Russ.). Available at: http://viam.ru/public/files/2011/2011-205837.pdf

[7] Bazyleva O.A., Bondarenko Yu.A., Timofeeva O.B., Khvatskiy K.K. Influence of crystallographic orientation on the structure and properties of BKHA-1B alloy. Metallurgiya mashinostroeniya [Metallurgy of Machinery Building], 2012, no. 4, pp. 9-13 (in Russ.). Available at: http://viam.ru/public/files/2011/2011-205936.pdf

[8] Bazyleva O.A., Arginbaeva E.G., Kolodochkina V.G., Khvatskiy K.K. The influence of crystallographic orientation on structure, physical and mechanical properties of intermetallic alloys based on Ni3Al. Aviatsionnye materialy i tekhnologii [Aviation Materials and Technologies], 2013, no. 2, pp. 3-7 (in Russ.).

[9] Bazyleva O.A., Arginbaeva E.G., Golynets S.A., Echin A.B. Effect of single-crystal billet macro- and microstructure on intermetallic alloy static and dynamic strength. Metallurgist, 2013, vol. 57, no. 7, pp. 742-747. DOI: 10.1007/s11015-013-9795-9 Available at: http://link.springer.com/article/10.1007/s11015-013-9795-9

[10] Bazyleva O.A., Arginbaeva E.G. Effect of heat treatment on the structure and heat resistance rhenium containing intermetallic nickel-based alloy. Aviatsionnye materialy i tekhnologii [Aviation Materials and Technologies], 2014, no. 2, pp. 21-26 (in Russ.).

[11] Ovsepyan S.V., Bazyleva O.A., Letnikov M.N., Arginbaeva E.G. The calculation of permanent joint of nickel superalloy and intermetallic nickel-based alloy stability. Voprosy materialovedeniya, 2014, no. 2, pp. 155-162 (in Russ.).

[12] Bazyleva O.A., Bondarenko Yu.A., Timofeeva O.B., Afanas’yev-Khodykin A.N. Effect of annealing and high-temperature heatings during soldering on structure and mechanical properties of alloy based on nickel aluminide. Materialovedenie, 2014, no. 3, pp. 15-20 (in Russ.).

[13] Bazyleva O.A., Arginbaeva E.G., Fesenko T.V., Kolodochkina V.G. Influence study of liquation on structure and durability of intermetallic alloys based on nickel. Materialovedenie, 2014, no. 6, pp. 7-12 (in Russ.).

[14] Lukin V.I., Ryl’nikov VS., Bazyleva O.A., Afanas’yev-Khodykin A.N. Practices of brazing and heat treatment of brazed joints of heat-resistant wrought alloy (EP975) and of casting mono crystalline intermetallide alloy (VKNA-4U). Svarochnoe proizvodstvo, 2014, no. 6, pp. 15-18 (in Russ.).

[15] Bazyleva O.A., Arginbaeva E.G., Zaytsev D.V, Fesenko T.V A study of microstructure and phase composition of Ni3Al-base intermetallic alloy with crystallographic orientation [001]. Metal Science and Heat Treatment, 2015, vol. 57, no. 3, pp. 133-137. DOI: 10.1007/s11041-015-9850-1 Available at: http://link.springer.com/article/10.1007/s11041-015-9850-1

[16] Morozova G.I. Chemical composition formation law for γ’/γ-groundmass of multicomponent nickel-based alloys. Doklady AN SSSR, 1991, vol. 320, no. 6, pp. 1413-1416 (in Russ.).

[17] Dimitrienko Yu.I., Gubareva E.A., Sborshchikov S.V, Bazyleva O.A., Lutsenko A.N., Oreshko E.I. Modeling the elastic-plastic characteristics of monocrystalline intermetallic alloys based on microstructural numerical analysis. Matematicheskoe modelirovanie i chislennye metody, 2015, no. 2, pp. 3-22 (in Russ.). DOI: 10.18698/2309-3684-2015-2-322 Available at: http://mmcm.bmstu.ru/articles/45/

[18] Dimitrienko Yu.I., Fedonyuk N.N., Gubareva E.A., Sborshchikov S.V, Prozorovskiy A.A. Multiscale finite-element modeling of sandwich honeycomb composite structures. Nauka i obrazovanie: nauchnoe izdanie MGTU im. N.E. Baumana [Science and Education: Scientific Publication of BMSTU], 2014, no. 7, pp. 243-265 (in Russ.). DOI: 10.7463/0714.0717805 Available at: http://technomag.bmstu.ru/doc/717805.html

[19] Burkovskaya N.P., Efimochkin I.Yu., Sevost’yanov N.V, Rodionov A.I. Composite material based on Al2O3 dispersion-strengthened nickel-aluminide. Materialovedenie, 2015, no. 8, pp. 29-24 (in Russ.).