9 / 9
[15] Odintsov L.G. Uprochnenie i otdelka detaley poverkhnostnym plasticheskim
deformirovaniem: Spravochnik [Hardening and finish details by using surface plastic
deformation. Handbook]. Moscow, Mashinostroenie Publ., 1987. 328 p.
[16] Shneyder Yu.G. Kholodnaya besshtampovaya obrabotka metallov davleniem [Cold
metal-forming process]. Leningrad, Mashinostroenie Publ., 1967. 352 p.
[17] Poduraev V.N., Yaroslavtsev V.M., Yaroslavtseva N.A. The efficiency of processing
by cutting with leading plastic deforming.
Izv. Vyssh. Uchebn. Zaved., Mashinostr.
[Proc. Univ., Mech. Eng.], 1972, no. 12, pp. 58–61 (in Russ.).
[18] Yaroslavtsev V.M., Simonov A.G. Vliyanie ul’trazvukovogo uprochneniya na
protsess rezaniya s operezhayushchim plasticheskim deformirovaniem. Obrabotka
materialov rezaniem [Effect of ultrasonic hardening on the cutting process with
leading plastic deforming. Machining of materials]. Moscow, MDNTP Publ., 1979.
P. 58–62.
[19] Yaroslavtsev V.M., Simonov A.G. The use of smoothing for leading plastic deforming
of the cut down layer of the material at the outer turning.
Izv. Vyssh. Uchebn. Zaved.,
Mashinostr.
[Proc. Univ., Mech. Eng.], 1980, no. 2, pp. 117–119 (in Russ.).
[20] Yaroslavtsev V.M., Simonov A.G. The efficiency of the centrifugal processing when
turning with leading plastic deforming.
Izv. Vyssh. Uchebn. Zaved., Mashinostr.
[Proc.
Univ., Mech. Eng.], 1990, no. 2, pp. 153–156 (in Russ.).
[21] Yaroslavtsev V.M., Simonov A.G. Cutting with leading plastic deforming by
caulking.
Izv. Vyssh. Uchebn. Zaved., Mashinostr.
[Proc. Univ., Mech. Eng.], 1990,
no. 4, pp. 129–132 (in Russ.).
Статья поступила в редакцию 18.03.2014
Ярославцев Виктор Михайлович — д-р техн. наук, профессор кафедры “Технологии
обработки материалов” МГТУ им. Н.Э. Баумана. Автор более 290 научных работ в
области теории резания, технологии производства летательных аппаратов, разработ-
ки новых методов обработки композиционных и труднообрабатываемых материалов.
МГТУ им. Н.Э. Баумана, Российская Федерация, 105005, Москва, ул. 2-я Бауманская,
д. 5.
Yaroslavtsev V.M. — Dr. Sci. (Eng.), professor of “Technologies of Treatment of Materials”
department of the Bauman Moscow State Technical University. Author of more than 290
publications in the field of theory of cutting, technology of flying vehicles production,
development of new methods for treatment of composite and churlish materials.
Bauman Moscow State Technical University, 2-ya Baumanskaya ul. 5, Moscow, 105005
Russian Federation.
ISSN 0236-3941. Вестник МГТУ им. Н.Э. Баумана. Сер. “Машиностроение” 2015. № 1 127