Создание интерметаллидных никелевых сплавов и композиционных материалов на их основе
ISSN 0236-3941. Вестник МГТУ им. Н.Э. Баумана. Сер. Машиностроение. 2017. № 3
87
DOI: 10.18698/0236-3941-2017-3-75-89
CREATION OF INTERMETALLIC NICKEL ALLOYS AND COMPOSITE
MATERIALS ON THEIR BASIS
O.G. Ospennikova
lab3@viam.ruO.A. Bazyleva
E.G. Arginbaeva
A.V. Shestakov
E.Yu. Turenko
All-Russian Institute of Aviation Materials, Моscow, Russian Federation
Abstract
Keywords
The study shows the main directions and results
of research into the development of high-
temperature alloys based on nickel aluminides,
composites based on them and technologies for
manufacturing semi-finished products from
these materials
Nickel aluminide, intermetallic nickel alloy,
single crystal, mathematical simulation, compo-
site material, dispersion hardening, mechanical
alloying, extrusion, rolling, microstructure
REFERENCES
[1] Kablov E.N. Innovative developments of FSUE «VIAM» SSC of RF on realization of
«Strategic directions of the development of materials and technologies of their processing for
the period until 2030».
Aviatsionnye materialy i tekhnologii
[Aviation Materials and Technolo-
gies], 2015, no. 1, pp. 3–33 (in Russ.).
[2] Kablov E.N. Strategical areas of developing materials and their processing technologies for
the period up to 2030.
Aviatsionnye materialy i tekhnologii
[Aviation Materials and Technolo-
gies], 2012, no. S, pp. 7–17 (in Russ.).
[3] Kablov E.N., Ospennikova O.G., Bazyleva O.A. Materials for parts of gas turbine engines
under high heat loads.
Vestn. Mosk. Gos. Tekh. Univ. im. N.E. Baumana, Mashinostr.
[Herald of
the Bauman Moscow State Tech. Univ., Mechan. Eng.], 2011, no. SP2, pp. 13–19 (in Russ.).
[4] Bazyleva O.A., Arginbaeva E.G., Turenko E.Yu. High-temperature casting intermetallic
alloys.
Aviatsionnye materialy i tekhnologii
[Aviation Materials and Technologies], 2012, no. S,
pp. 57–60 (in Russ.).
[5] Povarova K.B., Bazyleva O.A., Drozdov A.A., Alad'yev N.A., Samsonova M.A. Research on
low-cycle fatigue of intermetallic alloy based on Ni
3
Al of VKNA-25 type at room temperature.
Metally
, 2012, no. 6, pp. 70–81 (in Russ.).
Available at:
http://viam.ru/public/files/2011/2011-205961.pdf[6] Bazyleva O.A., Goryunov A.V., Zagvozdkina T.N., Nefedov D.G. Evaluation of effect of seg-
regation inhomogeneity in single crystals of BKHA-4У alloy on its structure and properties.
Metallurgiya mashinostroeniya
[Metallurgy of Machinery Building], 2012, no. 3, pp. 18–21
(in Russ.). Available at:
http://viam.ru/public/files/2011/2011-205837.pdf[7] Bazyleva O.A., Bondarenko Yu.A., Timofeeva O.B., Khvatskiy K.K. Influence of crystallo-
graphic orientation on the structure and properties of BKHA-1B alloy.
Metallurgiya mashi-
nostroeniya
[Metallurgy of Machinery Building], 2012, no. 4, pp. 9–13 (in Russ.).
Available at:
http://viam.ru/public/files/2011/2011-205936.pdf