Improvement of Fuel Economy of Ship’s Engine at Operation Modes with Increase of Maximal Cycle Pressure
| Authors: Orekhov S.N., Perov K.Yu. | Published: 25.09.2013 |
| Published in issue: #1(78)/2010 | |
| DOI: | |
| Category: Power-generating and Transport Machine Building | |
| Keywords: engine, characteristics, maximal cycle pressure, mathematical simulation, air supply (supercharging) | |
Operation of Transport Diesel on Mixtures of Diesel Fuel and Rape Oil
| Authors: Markov V.An., Stremyakov A.V., Devyanin S.N. | Published: 25.09.2013 |
| Published in issue: #1(78)/2010 | |
| DOI: | |
| Category: Power-generating and Transport Machine Building | |
| Keywords: diesel engine, diesel fuel, rape oil, waste gas toxicity | |
Determination of Elastic Element Rigidity Ratio of Fractal Two-Level System of Cushioning of Fast-Moving Caterpillar Vehicles
| Authors: Sarach Ye.B. | Published: 25.09.2013 |
| Published in issue: #1(78)/2010 | |
| DOI: | |
| Category: Power-generating and Transport Machine Building | |
| Keywords: system of cushioning, suspension, caterpillar vehicle, vehicle, relaxation suspension, fractal suspension, motion smoothness | |
Optimal Relationship of Rotor Rotation Frequency and Axial Gap in Working Channel of Molecular and Viscous Vacuum Pump
| Authors: Demikhov K.E., Nikulin N.K., Dronov A.V., Dronova T.V. | Published: 25.09.2013 |
| Published in issue: #1(78)/2010 | |
| DOI: | |
| Category: Power-generating and Transport Machine Building | |
| Keywords: vacuum pump, working disc, force of inertia, centrifugal force, axial displacement, optimal relationship, exhaust characteristic, working channel | |
Application of Microcontrollers for Control of Multifunctional Devices for Diagnostics and Failure Prediction of Turbomolecular Pumps
| Authors: Basmanov M.S., Deulin E.A. | Published: 27.09.2013 |
| Published in issue: #4(81)/2010 | |
| DOI: | |
| Category: Power-generating and Transport Machine Building | |
| Keywords: diagnostics, failure prediction, bearing joint, turbomolecular pump, microcontroller unit, control system, reliability, automation | |
Scheme Analysis and Optimization of Parameters of Combined Plants with High-Temperature Fuel Cells and Gas Turbines
| Authors: Osipov M.I., Gasilov A.V. | Published: 27.09.2013 |
| Published in issue: #2(79)/2010 | |
| DOI: | |
| Category: Power-generating and Transport Machine Building | |
| Keywords: fuel cell, gas turbine, reforming, turbine machines, power plant, combined cycle | |
Peculiarities of Application of Methyl Ether of Rapeseed Oil as Diesel Fuel
| Authors: Markov V.An., Shuster A.Yu., Devyanin S.N. | Published: 07.10.2013 |
| Published in issue: #3(80)/2010 | |
| DOI: | |
| Category: Power-generating and Transport Machine Building | |
| Keywords: diesel, diesel fuel, rapeseed oil, methyl ether of rapeseed oil, fuel economy, waste gas toxicity | |
Gas-Flare Ignition Device
| Authors: Sukhov A.V., Lavrov B.P, Gavrilenko I.V., Sergeev A.V. | Published: 07.10.2013 |
| Published in issue: #3(80)/2010 | |
| DOI: | |
| Category: Power-generating and Transport Machine Building | |
| Keywords: solid propellant, rapeseed oil, combustion, ignition, microwave diagnostics | |
Peculiarities of Aerodynamic Design of High-Pressure Stages of Multistage Axial Compressors
| Authors: Arkhipov D.V. | Published: 07.10.2013 |
| Published in issue: #3(80)/2010 | |
| DOI: | |
| Category: Power-generating and Transport Machine Building | |
| Keywords: axial compressor, theoretical work, reduced speed, diffuser factor, computational fluid dynamics | |
Investigation in Processes of Fuel Supply and Injection in Diesel with Non-partitioned Combustion Chamber during Start Modes
| Authors: Kamaltdinov V.G. , Markov V.An. | Published: 07.10.2013 |
| Published in issue: #3(80)/2010 | |
| DOI: | |
| Category: Power-generating and Transport Machine Building | |
| Keywords: diesel engine, combustion chamber, start modes, injector, atomizer, spraying outlets, sprays ofatomized fuel | |