|

The Algorithm of Gas Dynamic Calculation on Asymmetric Cones by the Method of Local Wedges and Cones

Authors: Gorskiy V.V., Brodskiy M.Yu. Published: 27.03.2023
Published in issue: #1(144)/2023  

DOI: 10.18698/0236-3941-2023-1-22-37

 
Category: Aviation and Rocket-Space Engineering | Chapter: Aerodynamics and Heat Transfer Processes in Aircrafts  
Keywords: problems of spatial flow, laminar turbulent heat transfer, boundary layer, method of local wedges and cones

Abstract

Studies related to alteration in the shape of a body moving in the dense layers of the Earth’s atmosphere at high speed are associated with the need to consider an entire set of problems having no strict physical and mathematical description. To solve problems of this kind, it becomes necessary to use semi-empirical approaches tested on fundamental experimental data obtained in a fairly wide range of determining factors on the models characterized, as a rule, by an extremely simple pattern of the gas flow. Introduction of this mathematical description in real operating conditions is characterized by the need to study the processes of gas dynamics and heat transfer in the three-dimensional formulation combined with the complex nature of their course. These processes determine alteration in the shape of a body causing serious problems associated with rigorous solution of this complex mutually conjugate problem. As a result, there appeared a large number of publications devoted to approximate methods for calculating the spatial flow around bodies by the gas flow used to calculate intensity of the convective heat transfer. This article describes in detail the algorithm for solving the problem of spatial flow around blunt cones by the method of local wedges and cones

Please cite this article in English as:

Gorskiy V.V., Brodskiy M.Yu. The algorithm of gas dynamic calculation on asymmetric cones by the method of local wedges and cones. Herald of the Bauman Moscow State Technical University, Series Mechanical Engineering, 2023, no. 1 (144), pp. 22--37 (in Russ.). DOI: https://doi.org/10.18698/0236-3941-2023-1-22-37

References

[1] Gorskiy V.V., ed. Matematicheskoe modelirovanie teplovykh i gazodinamicheskikh protsessov pri proektirovanii letatelnykh apparatov [Mathematical modeling of thermal and gas-dynamic processes in the design of aircraft]. Moscow, Bauman MSTU Publ., 2011.

[2] Shevelev Yu.D. Trekhmernye zadachi teorii laminarnogo pogranichnogo sloya [Three-dimensional problems of the theory of the laminar boundary layer]. Moscow, Nauka Publ., 1977.

[3] Valio-Laurin R. Laminar heat transfer on three-dimensional blunt nosed bodies in hypersonic flow. ARSJ, 1959, vol. 29, no. 2, pp. 123--129. DOI: https://doi.org/10.2514/8.4698

[4] Avduevskiy V.S. Approximate method for calculating a three-dimensional boundary layer on a spreading line. Mekhanika i mashinostroenie, 1962, no. 2, pp. 11--16 (in Russ.).

[5] Rakish J.V., Matter G.G. Calculation of metric coefficients for streamline coordinates. AIAA J., 1972, vol. 10, no. 11, pp. 1538--1540. DOI: https://doi.org/10.2514/3.6659

[6] Maykapar G.I. Calculation of current lines according to a known pressure distribution. PMM, 1964, vol. 28, no. 2, pp. 381--382 (in Russ.).

[7] Ley D.K., Ross B.B. Geometry of current lines in a three-dimensional inviscid hypersonic flow. Raketnaya tekhnika i kosmonavtika, 1969, vol. 7, no. 1, pp. 145--152 (in Russ.).

[8] Znamenskiy V.V., Zubarev A.V. Calculation of convective heat flows in three-dimensional flow over a given pressure distribution. Izvestiya AN SSSR. Mekhanika zhidkosti i gaza, 1987, no. 3, pp. 160--167 (in Russ.).

[9] Lunev V.V. Techenie realnykh gazov s bolshimi skorostyami [Flow of real gases with high velocities]. Moscow, FIZMATLIT Publ., 2007.

[10] Lunev V.V. Giperzvukovaya aerodinamika [Hypersonic aerodynamics]. Moscow, Mashinostroenie Publ., 1975.

[11] Lunev V.V., Magomedov K.M., Pavlov V.G. Giperzvukovoe obtekanie prituplennykh konusov s uchetom ravnovesnykh fiziko-khimicheskikh prevrashcheniy [Hypersonic flow around blunted cones taking into account equilibrium physico-chemical transformations]. Moscow, Vychislitelnyy tsentr AN SSSR Publ., 1968.

[12] Linnik Yu.V. Metod naimenshikh kvadratov i osnovy teorii obrabotki nablyudeniy [The method of least squares and the basics of the theory of processing observations]. Moscow, FIZMATLIT Publ., 1958.

[13] Aoki M. Introduction to optimization techniques. Macmillan, 1971.

[14] Znamenskiy V.V. On the calculation of convective heat flows in three-dimensional flow. Kosmonavtika i raketostroenie [Cosmonautics and Rocket Engineering], 2006, no. 3, pp. 111--115 (in Russ.).

[15] Gorskiy V.V. Teoreticheskie osnovy rascheta ablyatsionnoy teplovoy zashchity [Theoretical basis for calculating ablative thermal protection]. Moscow, Nauchnyy mir Publ., 2015.