The properties of the intermetal matrix fibre composite
| Authors: Vasiljeva A.G., Vorobjev A.V., Ustinov L.M., Zhamnova V.I. | Published: 22.06.2015 |
| Published in issue: #1(1)/1991 | |
| DOI: | |
| Category: Design | |
| Keywords: | |
Determination of the gas burner parameters for welding of the electric evacuated instruments
| Authors: Stepanjants Yu.R., Solovjev S.G. | Published: 22.06.2015 |
| Published in issue: #1(1)/1991 | |
| DOI: | |
| Category: Design | |
| Keywords: | |
Criterions for the evaluation of the technological facilities of the laser systems
| Authors: Grigoryants A.G., Bogdanov A.V., Ivanov Yu.V., Gavriluk V.S., Golubenko Yu.V., Krivov B.I. | Published: 22.06.2015 |
| Published in issue: #1(1)/1991 | |
| DOI: | |
| Category: Design | |
| Keywords: | |
Estimation of the body of revolution airodynamic parameters in the incompressible flow using the vortex surface method
| Authors: Pastukhov A.I., Deryabin A.D., Veretennikov V.F. | Published: 22.06.2015 |
| Published in issue: #1(1)/1991 | |
| DOI: | |
| Category: Design | |
| Keywords: | |
Probabilistic optimization of the plain multilayer reinforced load-carrying constructions by the method of equivalent volume
| Authors: Chekanov A.N., Korchivoy S.A. | Published: 23.06.2015 |
| Published in issue: #1(26)/1997 | |
| DOI: | |
| Category: Design | |
| Keywords: | |
Estimation of transmission design perfection for multi-wheel trucks
| Authors: Axenov P.V., Belousov B.N. | Published: 23.06.2015 |
| Published in issue: #2(27)/1997 | |
| DOI: | |
| Category: Design | |
| Keywords: | |
Fluid Flow Impact on Dynamic Stability of the Straight Rod Under Compression and Torsion Conditions
| Authors: Rezazade L.G., Svetlitsky V.A.  | Published: 05.07.2015 |
| Published in issue: #3(28)/1997 | |
| DOI: | |
| Category: Design | |
| Keywords: | |
Design of Mixing Heat Exchange Units
| Authors: Afanas’ev V.N., Zakharov А.О. | Published: 05.07.2015 |
| Published in issue: #3(28)/1997 | |
| DOI: | |
| Category: Design | |
| Keywords: | |
Elimination of Errors in the Substructures Synthesis Using Strict Bounds Method and Correcting Series in the Orthogonal Subspace
| Authors: Grigoriev V.G. | Published: 05.07.2015 |
| Published in issue: #3(28)/1997 | |
| DOI: | |
| Category: Design | |
| Keywords: | |
Selection of Program for Heat Tests of Objects with Spectral and Selective Properties, Using Radiant Heating Facilities
| Authors: Tovstonog A.V. | Published: 05.07.2015 |
| Published in issue: #3(28)/1997 | |
| DOI: | |
| Category: Design | |
| Keywords: | |
