Requirements to complex technical systems: initial data processing
| Authors: Novikov В.К., Pashkov N.Yu. | Published: 24.05.2015 |
| Published in issue: #4(33)/1998 | |
| DOI: | |
| Category: Design | |
| Keywords: | |
Selecting optimal location and stiffness features of supports while basing on finite element synthesis of framework oscillation frequencies
| Authors: Nosko P.L., Shiteru Nakagiri, Nosko A.L. | Published: 24.05.2015 |
| Published in issue: #3(32)/1998 | |
| DOI: | |
| Category: Design | |
| Keywords: | |
Energy plants with impulse plasma engines
| Authors: Savichev V.V., Grishin S.D. | Published: 29.05.2015 |
| Published in issue: #1(30)/1998 | |
| DOI: | |
| Category: Design | |
| Keywords: | |
Contour modification of elastic axisymmetric structures based on the finite element synthesis
| Authors: Nosko P.L., Kalinenko N.A., Nosko A.L. | Published: 29.05.2015 |
| Published in issue: #1(30)/1998 | |
| DOI: | |
| Category: Design | |
| Keywords: | |
Creation and investigation of diesel engine operating on carbon suspensions
| Authors: Grekhov L.V. | Published: 29.05.2015 |
| Published in issue: #1(30)/1998 | |
| DOI: | |
| Category: Design | |
| Keywords: | |
Approximat method of the short wings flow estimation using the non-linear theory of continuous vortex surface
| Authors: Pastukhov A.I., Galemin Ye.K. | Published: 22.06.2015 |
| Published in issue: #1(1)/1991 | |
| DOI: | |
| Category: Design | |
| Keywords: | |
The prospect forming technology and equipment for manufacturing of the axially symmetric parts from ferrous powders
| Authors: Dmitriev A.M. | Published: 22.06.2015 |
| Published in issue: #1(1)/1991 | |
| DOI: | |
| Category: Design | |
| Keywords: | |
Optimization of the structure parameters of the continuous casting machine
| Authors: Danilov V.L., Zarubin S.V. | Published: 22.06.2015 |
| Published in issue: #1(1)/1991 | |
| DOI: | |
| Category: Design | |
| Keywords: | |
Estimation of the static stressed-deformable state of the absolutely flexible pipe loaded by hydrodynamic pressure
| Authors: Yankin V.A. | Published: 22.06.2015 |
| Published in issue: #1(1)/1991 | |
| DOI: | |
| Category: Design | |
| Keywords: | |
Development of the stand for the spindle axes trajectories measurements
| Authors: Dodonov V.V., Moskvin V.K. | Published: 22.06.2015 |
| Published in issue: #1(1)/1991 | |
| DOI: | |
| Category: Design | |
| Keywords: | |