Flow instability and its control in compression systems - page 14

40.
Jiang, K.
A Study on the Numerical Simulation of Stall and Its Inception
in Compressors. [Research Report]. Beijing, China: Institute of Engineering
Thermophysics, Chinese Academy of Sciences, 2002, (in Chinese).
41.
Gong, Y, Tan, C.S, Gordon, K.A, et al.
A Computational Model for Short
Wavelength Stall Inception and Development in Multi-Stage Compressors. ASME J.
Turbomachinery, 1999, 121: 726–734.
42.
Nakano, T, Kodama, H, Imanari, K.
Numerical Simulation of Instability Inception
and development in High-Speed Multi-Stage Axial-Flow Compressors. In: Proc. of
the 14
th
ISABE 99-7228. Florence, Italy, 1999.
43.
Behnken, R.L, et al.
Characterizing the Effects of Air Injection on Compressor
Performance for Use in Active Control of Rotating Stall. ASME 97-GT-316, 1997.
44.
Weigl, H.J, Paduano, J.D, Frechette, L.G, et al.
Active Stabilization of Rotating Stall
and Surge in a Transonic Single Stage Axial Compressor. ASME J. Tur- bomachinery,
1998, 120: 625–636.
45.
Suder, K.L, Hathaway, M.D, Thorp, S.A, et al.
Compressor Stability Enhancement
using Discrete Tip Injection. ASME J. Turbomachinery, 2001, 123: 14–23.
46.
Nie, C, Xu, G, Cheng, X, et al.
Micro Air Injection and Its Unsteady Response in a
Low-Speed Axial Compressor. ASME 2002-GT-30361, ASME J. Turbomachinery,
2002, 124: 572–579.
47.
Xu, G, Nie, C, Huang, W, et al.
Numerical Simulation of Stall Suppression by Micro
Air Injection in a Low-Speed Axial Compressor. Paper Submitted to the IGTC’2003,
Tokyo, Japan, 2002.
48.
Liao, S.
Robust Control of Surge and Rotating Stall in an Axial Compressor: [Ph.D.
Thesis]. USA: Department of Aeronautics and Astronautics, MIT, 2000.
Статья поступила в редакцию 8.07.2005
Jingyi Chen (b. 1938) graduated from the Bauman Moscow Higher Technical School
in 1962. Professor of Institute of Engineering Thermophysics of Chinese Academy
of Sciences. Member of Chinese Society of Engineering Thermophysics and of
editorial council of Chinese Journal of Engineering Thermophysics. Member of ASME
International (American Society of Mechanical Engineering). Member of Turbomachinery
Committee, IGTI (International Gas Turbine Institute), ASME International. Author of
a number of publications in the field of turbomachinery: flow instability and active-
passive control, flow-structure interaction and manipulation, three-dimensional viscous
and unsteady flow computation and analysis, aerodynamic design and testing; energy:
strategic research of energy development, advanced energy-power system.
Чэнь Цзин-и родился в 1938 г., окончил в 1962 г. МВТУ им. Н.Э. Баумана. Профес-
сор Института инженерной теплофизики Китайской академии наук; член Китайского
общества инженерной теплофизики и член редколлегии Китайского журнала инже-
нерной теплофизики. Член Американского машиностроительного общества (ASME).
Член комиссии по турбомашиностроению Международного газотурбинного инсти-
тута Американского машиностроительного общества. Автор ряда научных работ
в области турбомашиностроения (нестабильность потока и активное и пассивное
управление, взаимодействие структур потока и манипуляция ими, расчет и анализ
трехмерного вязкого и неустановившегося течения, аэродинамический расчет и аэ-
родинамические испытания) и энергетики (стратегические исследования развития
энергетики, перспективные энергосистемы).
126 ISSN 0236-3941. Вестник МГТУ им. Н.Э. Баумана. Сер. “Машиностроение”. 2006. № 2
1...,4,5,6,7,8,9,10,11,12,13 14
Powered by FlippingBook