В.М. Ярославцев, Н.А. Ярославцева
78
ISSN 0236-3941. Вестник МГТУ им. Н.Э. Баумана. Сер. Машиностроение. 2016. № 4
Ярославцева Нина Александровна
— канд. техн. наук, доцент кафедры «Технологии
обработки материалов» МГТУ им. Н.Э. Баумана (Российская Федерация, 105005,
Москва, ул. 2-я Бауманская, д. 5).
Просьба ссылаться на эту статью следующим образом:
Ярославцев В.М., Ярославцева Н.А. Способ исследования больших пластических де-
формаций // Вестник МГТУ им. Н.Э. Баумана. Сер. Машиностроение. 2016. № 4.
C. 71–80. DOI: 10.18698/0236-3941-2016-4-71-80
METHOD OF LARGE PLASTIC STRAIN RESEARCH
V.M. Yaroslavtsev
mt13@bmstu.ruN.A. Yaroslavtseva
Bauman Moscow State Techical University, Moscow, Russian Federation
Abstract
Keywords
Creating a theoretical framework for high-perfor-mance imple-
mentations of capabilities of the cutting method with outstrip-
ping plastic deformation (OPD), first proposed and developed in
Bauman Moscow State Technical University, requires extensive
research, including metallographic research. In the treatment
area cutting with OPD uses two mechanical sources of energy:
methods of surface plastic strain and cutting. To study the strain
state of the material, method of coordinate dividing grids is
widely used. However, the scientific literature does not describe
a single experimental method of obtaining a deformation field
pattern in the cutting area, which results from the total impact
on the material of two consecutive large plastic strains — from
pressure treatment and the process of cutting, as when cutting
with OPD. We show a new method of applying micro-grids,
which allows us to solve the task of recreating a real pattern of
deformation occurring in the zone of chip formation when
cutting with OPD under the actual operating conditions, the
angles of sharpening the cutting tool and the use of intractable
materials
Coordinate dividing micro-grids,
machining, chip formation, me-
thod of plastic deformation re-
search, cutting with outstripping
plastic deformation
REFERENCES
[1] Poduraev V.N., Yaroslavtsev V.M., Yaroslavtseva N.A. A method of machining with lea-
ding plastic deformation.
Vestnik mashinostroeniya
[Bulletin of mechanical engineering],
1971, no. 4, pp. 64–65 (in Russ.).
[2] Yaroslavtsev V.M. Development and practical implementation of methodology of search of
new methods of material processing.
Vestn. Mosk. Gos. Tekh. Univ. im. N.E. Baumana, Mashi-
nostr.
[Herald of the Bauman Moscow State Tech. Univ., Mech. Eng.], 2007, no. 2, pp. 56–70
(in Russ.).
[3] Yaroslavtseva N.A., Yaroslavtsev V.M., Poduraev V.N. Sposob obrabotki rezaniem
[Method of processing by cutting]. Inventor’s Certificate USSR, no. 358089, 1972.