Simulation Modeling Production Processes of Various Types of Machine-Building Enterprises

Abstract

The article considers the main methods of simulation modeling, their applicability and approaches to simulation modeling production processes of manufacture and logistics systems of machine-building enterprises. The types of manufacture and logistics systems of machine-building enterprises are described. Their main classification features are pointed out such as the number of operations performed at one workplace, the variety of nomenclature as well as types of production processes. The features of simulation modeling production processes in mass and serial production are determined. The prospects for the use of operational scheduling systems in conjunction with simulation systems for machine-building enterprises of a serial type are shown. The main differences are considered in the use of simulation modeling and operational scheduling systems for assessing the feasibility of a production program. The existing software solutions for simulation modeling production processes of various machine-building enterprises are analyzed and the potential advantages of their use in conjunction with operational scheduling systems are described. An approach to the formation of simulation models of manufacture and logistics systems with a combined type of production is proposed, the use of which allows increasing the adequacy of modeling manufacture and logistics systems with various types of production.

Please cite this article in English as:

Grigoriev S.N., Dolgov V.A., Nikishechkin P.A., et al. Simulation modeling production processes of various types of machine-building enterprises. Herald of the Bauman Moscow State Technical University, Series Mechanical Engineering, 2022, no. 3 (142), pp. 84--99 (in Russ.). DOI: https://doi.org/10.18698/0236-3941-2022-3-84-99

References

[1] Gorelova G.V. Cognitive approach to simulation of large systems. Izvestiya YuFU. Tekhnicheskie nauki [Izvestiya SFedU. Engineering Sciences], 2013, no. 3, pp. 239--250 (in Russ.).

[2] Toluev Yu.I. [Simulation tasks during the implementation of the industry 4.0 concept in the field of production and logistics]. IMMOD-2017. St. Petersburg, NOIM Publ., 2017, pp. 57--65 (in Russ.).

[3] Grigoriev S.N., Martinov G.M. Research and development of a cross-platform CNC kernel for multi-axis machine tool. Procedia CIRP, 2014, vol. 14, pp. 517--522. DOI: https://doi.org/10.1016/j.procir.2014.03.051

[4] Grigoriev S.N., Dolgov V.A., Nikishechkin P.A., et al. Development of a structural model of a digital twin of machine-building enterprises production and logistics system. Herald of the Bauman Moscow State Techical University, Series Mechanical Engineering, 2021, no. 2 (137), pp. 43--58 (in Russ.). DOI: http://dx.doi.org/10.18698/0236-3941-2021-2-43-58

[5] Borovkov A.I., Ryabov Yu.A. [Digital twins: definition, approaches and methods of development]. Sb. tr. nauch.-prakt. konf. "Tsifrovaya transformatsiyz ekonomiki i promyshlennosti" [Proc. Sc.-Pract. Conf. "Digital Transformation of Economy and Industry"]. St. Petersburg, SPbPU Publ., 2019, pp. 234--245 (in Russ.).

[6] Grigoriev S.N., Masterenko D.A., Teleshevskiy V.I., et al. Contemporary state and outlook for development of metrological assurance in the machine-building industry. Meas. Tech., 2013, vol. 55, no. 11, pp. 1311--1315. DOI: https://doi.org/10.1007/s11018-013-0126-0

[7] Grigoriev S.N., Dolgov V.A., Leonov A.A. Imitation modeling of production processes by using the planned and situational logic of the workplaces reservation. Avtomatizatsiya. Sovremennye tekhnologii [Automation. Modern Technologies], 2021, no. 1, pp. 3--10 (in Russ.).

[8] Grigoriev S.N., Kozochkin M.P., Sabirov F.S., et al. Diagnostic systems as basis for technological improvement. Procedia CIRP, 2012, vol. 1, pp. 599--604. DOI: https://doi.org/10.1016/j.procir.2012.05.006

[9] Grigoriev S.N., Dolgov V.A., Umnov P.I., et al. Imitation modeling of production processes by using the planned and situational logic of the workplaces reservation. Avtomatizatsiya. Sovremennye tekhnologii [Automation. Modern Technologies], 2021, vol. 75, no. 7, pp. 291--295 (in Russ.).

[10] Nikishechkin P.A., Ivashin S.S., Chernenko V.E., et al. PlantTwin simulation system as a tool for verifying production plans and supporting decision-making to improve the efficiency of machine-building industries. MATEC Web Conf., 2020, vol. 329, art. 03075. DOI: https://doi.org/10.1051/matecconf/202032903075

[11] Arkhangel’skiy V.E. [Production planning system requirements in the scope of "Industriya 4.0" conception]. VII Mezhdunar. forum "Informatsionnye tekhnologii na sluzhbe oboronno-promyshlennogo kompleksa Rossii" [VII Int. Forum "Information Technologies on Duty of Russian Defence Industry Complex"]. 2018 (in Russ.). Available at: http://xn--hlaelen.xn--plai/wp-content/uploads/2018/05/Arhangelskij.pdf (accessed: 18.02.2020).

[12] Grigoriev S.N., Martinov G.M. An ARM-based multi-channel CNC solution for multi-tasking turning and milling machines. Procedia CIRP, 2016, vol. 46, pp. 525--528. DOI: https://doi.org/10.1016/j.procir.2016.04.036

[13] Dolgov V.A., Nikishechkin P.A., Arkhangel’skiy V.E., et al. [Management models of production systems of machine-building enterprises based on the development and use of their digital counterparts]. Modelirovanie nelineynykh protsessov i system. Mater. 5 Mezhdunar. konf. [Modeling of Nonlinear Processes and Systems. Proc. 5 Int. Conf.]. Moscow, Yanus-K Publ., 2021, pp. 171--176 (in Russ.).

[14] Kutin A., Dolgov V., Sedykh M., et al. Integration of different computer-aided systems in product designing and process planning on digital manufacturing. Procedia CIRP, 2018, vol. 67, pp. 476--481. DOI: https://doi.org/10.1016/j.procir.2017.12.247

[15] Kutin A., Dolgov V., Sedykh M., et al. Competitive-resource information model of the machine building manufacturing system. IOP Conf. Ser.: Mater. Sc. Eng., 2018, vol. 448, art. 012008. DOI: https://doi.org/10.1088/1757-899X/448/1/012008

[16] Sistema imitatsionnogo modelirovaniya AnyLogic [AnyLogic imitation modeling system] anylogic.ru: website (in Russ.). Available at: https://anylogic.ru (accessed: 18.02.2020).

[17] Sistema imitatsionnogo modelirovaniya PlantTwin [PlantTwin imitation modeling system] plant-twin.com: website (in Russ.). Available at: https://plant-twin.com (accessed: 18.02.2020).

[18] Nikishechkin P.A., Ivashin S.S., Chernenko V.E., et al. PlantTwin simulation system as a tool for verifying production plans and supporting the decision-making to improve production effectiveness. Vestnik mashinostroeniya, 2021, no. 3, pp. 80--85 (in Russ.).DOI: https://doi.org/10.36652/0042-4633-2021-3-80-85

[19] Malykhanov A.A., Chernenko V.E. [From simulation models to digital twins: analysis of industrial projects experience]. 9 Vseros. nauch.-prakt. konf. po imitatsionnomu modelirovaniyu i ego primeneniyu v nauke i promyshlennosti [9 Russ. Sc.-Pract. Conf. on Imitation Modelling with its Application in Science and Industry]. Ekaterinburg, UrSPU Publ., 2019, pp. 37--46 (in Russ.).

[20] Grigoriev S.N., Martinov G.M. The control platform for decomposition and synthesis of specialized CNC systems. Procedia CIRP, 2016, vol. 41, pp. 858--863. DOI: https://doi.org/10.1016/j.procir.2015.08.031

[21] Grigoryev S.N., Dolgov V.A., Rakhmilevich E.G. A method for assessing manufacturability of products using semantic models in digital manufacturing. Izvestiya vysshikh uchebnykh zavedeniy. Mashinostroenie [BMSTU Journal of Mechanical Engineering], 2020, no. 12, pp. 16--25 (in Russ.).DOI: http://dx.doi.org/10.18698/0536-1044-2020-12-16-25