Ensuring the Quality of Treatment of Holes in Products from Polymeric Composite Materials

The generalized results of industrial and laboratory tests of unconventional technologies for improving the quality of manufacturing holes in products made of fibrous polymeric and layered hybrid composite materials are considered. Developed in BMSTU combined methods of processing, non-standard cutting tools and devices that ensure the combination of diverse energy impact on the treated surface, as well as the targeted creation of the required energy state of the material were given. It is shown that the application of the cutting method with additional technological coating on the operations of reaming, deployment and boring provides, depending on the processing conditions, a decrease in surface roughness of 1--3 classes (from 4 to 5--7 classes). Drilling with a thermo-mechanical impact on the cutting layer reduces the roughness parameter from Rz = 40--20 μm (class 4) to Ra = 2.5--1.6 μm (class 6). At the same time on the treated surfaces, fluffiness is completely eliminated. The possibility of increasing the productivity and quality of processing holes in multilayer hybrid composite materials by the use of special-purpose drills, which clean the processed surface on the backward pass of the tool, is considered. Practical recommendations are given to ensure defect-free processing of the hole edges at the tool inlet and outlet using additional coatings, as well as the creation of compressive stresses in the treatment area with the help of special tools

Литература

[1] Zaloga V.A., ed. Mekhanicheskaya obrabotka kompozitsionnykh materialov pri sborke letatel’nykh apparatov [Mechanical processing of composites at aircraft assembly process]. Sumy, Universitetskaya kniga Publ., 2013.

[2] Mozgovoy N.I., Markov A.M. Research on process of quality index formation of the holes in fiberglass parts. Polzunovskiy vestnik, 2009, no. 1--2, pp. 284--287 (in Russ.).

[3] Stepanov A.A. Obrabotka rezaniem vysokoprochnykh kompozitsionnykh materialov [Cutting work of high-strength composites]. Leningrad, Mashinostroenie Publ., 1987.

[4] Yaroslavtsev V.M. Obrabotka rezaniem polimernykh kompozitsionnykh materialov [Cutting work of polymer composites]. Moscow, Bauman MSTU Publ., 2012.

[5] Makarov V.F., Meshkas A.E., Shirinkin V.V. Research of processes of machining of details of aerospace technics from new composite materials. Novye materialy i tekhnologii v mashinostroenii [Science Intensive Technologies in Mechanical Engineering], 2015, no. 22, pp. 14--22 (in Russ.).

[6] Frolov K.V., ed. Mashinostroenie. Entsiklopediya. T. III-3. Tekhnologiya izgotovleniya detaley mashin [Mechanical engineering encyclopedia. Vol. III-3. Machine part production technology]. Moscow, Mashinostroenie Publ., 2000.

[7] Verezub N.V., Tarasyuk A.P., Khavin G.L., et al. Mekhanicheskaya obrabotka voloknistykh polimernykh kompozitov [Mechanical processing of fiber polymer composites]. Khar’kov, Izd-vo KhNADU (KhADI) Publ., 2001.

[8] Yaroslavtsev V.M., Sabel’nikov V.V., Gusenko A.Yu. Technological possibilities of cutting finish processing of fiber composites using technological coating. Izvestiya vysshikh uchebnykh zavedeniy. Mashinostroenie [Proceedings of Higher Educational Institutions. Маchine Building], 1998, no. 4--6, pp. 100--104 (in Russ.).

[9] Yaroslavtsev V.M. New technologies for surface layer quality improvement in cutting fibrous polymer composite materials. Vestn. Mosk. Gos. Tekh. Univ. im. N.E. Baumana, Mashinostr. [Herald of the Bauman Moscow State Tech. Univ., Mechan. Eng.], 2017, no. 6, pp. 79--88 (in Russ.). DOI: 10.18698/0236-3941-2017-6-79-88

[10] Yaroslavtsev V.M. New characteristic of metal machinability by cutting. Izvestiya vysshikh uchebnykh zavedeniy. Mashinostroenie [Proceedings of Higher Educational Institutions. Маchine Building], 1989, no. 5, pp. 144--148 (in Russ.).

[11] Semenov B.I., Ignatova E.V. Joining methods for uniform and non-uniform materials and composites, which are promising for use in rocket production. Vestn. Mosk. Gos. Tekh. Univ. im. N.E. Baumana, Mashinostr. [Herald of the Bauman Moscow State Tech. Univ., Mechan. Eng.], 2005, spec. iss. “Composite materials and constructions in technology”, pp. 99--105 (in Russ.).

[12] Yaroslavtsev V.M. Effect of deformational structural anisotropy of processed materials on cutting force. Izvestiya vysshikh uchebnykh zavedeniy. Mashinostroenie [Proceedings of Higher Educational Institutions. Маchine Building], 1976, no. 12, pp. 156--159 (in Russ.).

[13] Ivanov Yu.N. Drilling the holes in the mixed packets. Izvestiya Samarskogo nauchnogo tsentra RAN [Izvestia RAS SamSC], 2014, vol. 16, no. 1--5, pp. 1402--1406 (in Russ.).

[14] Vorob’yev Yu.A., Nikolenko A.I., Vorob’yev A.Yu. Analysis of study on drilling of mixed packets from composite and titanium alloys. Aviatsionno-kosmicheskaya tekhnika i tekhnologiya, 2008, no. 2, pp. 32--38 (in Russ.).

[15] Yaroslavtsev V.M. Mechanics of cutting process of plastically deformed metals with non-uniform properties of cutted layer. Vestn. Mosk. Gos. Tekh. Univ. im. N.E. Baumana, Mashinostr. [Herald of the Bauman Moscow State Tech. Univ., Mechan. Eng.], 1993, no. 4, pp. 93--103 (in Russ.).

[16] Ramulu M., Branson T., Kim D. A study on the drilling of composite and titanium stacks. Composites Structures, 2001, vol. 54, no. 1, pp. 67--77. DOI: 10.1016/S0263-8223(01)00071-X

[17] Chigrinets E.G., Sibirskiy V.V., Shevtsov S.N. Experimental investigation on the quality of holes in the multi-layered GFRP-titanium obtained in drilling operations. Inzhenernyy vestnik Dona [Engineering Journal of Don], 2015, vol. 37, no. 3, pp. 155--167 (in Russ.).

[18] Lobanov D.V., Sidorenko S.A. Modelling built-up constructions of turning tools for processing composite products. Trudy Bratskogo gosudarstvennogo universiteta. Ser. Estestvennye i inzhenernye nauki, 2016, vol. 2, pp. 17--22 (in Russ.).

[19] Baldaev L.Kh., ed. Gazotermicheskoe napylenie [Gas-thermal evaporation]. Moscow, Staraya Basmannaya Publ., 2015.